Publications

Proceedings (in English)

Articles (in English), Articles (in Japanese), Proceedings (in Japanese)


<2012>

  1. Y. Hasegawa, A. Yamamoto and N. Kasagi, “The Nature of Optimal and Suboptimal Controls in Dissimilar Heat and Momentum Turbulent Transport,” 7th Int. Symp. Turbulence, Heat and Mass Transfer, Palermo, Italy, Sep. 24-27, 2012.

2.     Nakamura, K., Somekawa, T., Fujita, K., Horiuchi, K., Matsuzaki, Y., Yamashita, S., Yokokawa, H., Horita, T., Yamaji , K. , Kishimoto, H., Yoshikawa, M., Yamamoto, T., Mugikura, Y., Watanabe, S., Sato, K., Hashida, T., Kawada, T., Kasagi, N., Shikazono, N., Eguchi, K., Matsui, T., Sasaki, K. and Shiratori, Y., “Study on Durability of Flattened Tubular Segmented-in-Series Type SOFC Stacks,” 10th European Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, June 27-29 2012, A1206.

3.     Sun, X., Jiao, Z., Lee, G., Hayakawa, K., Okita, K., Shikazono, N. and Kasagi, N., “3D Quantitative Characterization of Nickel-Yttria-stabilized Zirconia Solid Oxide Fuel Cell Anode Microstructure in Operation,” 10th European Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, June 27-29 2012, B1003.

4.     Jiao, Z., Shikazono, N. and Kasagi, N., “Evolution of Microstructural Parameters of Solid Oxide Fuel Cell Anode during Initial Discharge Process,” 10th European Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, June 27-29 2012, B0511.


<2011>

  1. Chen, N.-H., Tomita, U., Kasagi, N., Nagamune, T., and Suzuki, Y.,
    "Label-free Adhesion-based Cell Sorter Using Optimized Oblique Grooves for Early Cancer Detection,"
    24th IEEE Int. Conf. Micro Electro Mechanical Systems (MEMS’11), Cancun, 2011, pp. 904-907.

  2. Jiao, Z., Shikazono, N. and Kasagi, N.,
    "Study on Degradation of Solid Oxide Fuel Cell with Pure Ni Anode,"
    ECS Trans., 35 (1), 2011, pp.1735-1742.
    (PDF 345kbytes)
  3. Han, Y., Shikazono, N. and Kasagi, N.,
    "Liquid Film Thickness of Oscillating Flow in a Micro Tube,"
    Proc. 8th ASME-JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, USA, 2011, AJTEC2011-44190.
    (PDF 877kbytes)
  4. Stroh, A., Frohnapfel, B., Hasegawa, Y., Kasagi, N. & Tropea, C.
    "The Influence of Frequency-Limited and Noise-Contaminated Sensing on Reactive Turbulence Control Schemes"
    6th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP6), Ottawa, Canada, July 28-31, PC2P (2011)
    (PDF 192kbytes)
  5. Hasegawa, Y. & Kasagi, N.
    "Mechanism of Dissimilar Momentum and Heat Transfer Induced by a Traveling Wave-Like Blowing/Suction in Turbulent Channel Flow"
    6th Int. Symp. on Turbulence and Shear Flow Phenomena (TSFP6), Ottawa, Canada, July 28-31, P35P (2011)
    (PDF 196kbytes)
  6. Hasegawa, Y., Frohnapfel, B. & Kasagi, N.
    "Effects of Spatially Varying Slip Length on Friction Drag Reduction in Wall Turbulence"
    13th European Turbulence Conference (ETC13), Warsaw, Poland, Sept. 12-15, No. 133 (2011)
    (PDF 244kbytes)
  7. Shikazono, N. and Kasagi, N.,
    "Numerical Simulation of SOFC Electrode Polarization Using Three-Dimensional Microstructure Reconstructed by FIB-SEM",
    2011 MRS Fall meeting, (2011)
    (PDF 9 kbytes)

Back to header


<2010>

  1. Miki, D., Honzumi, M., Suzuki, Y. and Kasagi, N.,
    "Large-Amplitude MEMS Electret Generator with Nonlinear Spring,"
    Proc. 23rd IEEE Int. Conf. MEMS, Hong Kong, China, January 24-28, 2010, pp.176-179.
    (PDF 900 kbytes)
  2. Honzumi, M., Ueno, A., Hagiwara, K., Suzuki, Y., Tajima, T., and Kasagi, N.,
    "Soft-X-Ray-Charged Vertical Electrets and Its Application to Electrostatic Transducers,"
    Proc. 23rd IEEE Int. Conf. MEMS, Hong Kong, China, January 24-28, 2010, pp.635-638.
    (PDF 916 kbytes)
  3. Wu, T., Suzuki, Y., Kasagi, N. and Kashiwagi, K.,
    "Oil Droplet Manipulation Using Liquid Dielectrophoresis on Electret with Superlyophobic Surfaces,"
    Proc. 23rd IEEE Int. Conf. MEMS, Hong Kong, China, January 24-28, 2010, pp.1055-1058.
    (PDF 436 kbytes)
  4. Kirikae, D., Suzuki, Y. and Kasagi, N.,
    "Selective-emitter-enhanced Micro Thermophotovoltaic Power Generation System,"
    Proc. 23rd IEEE Int. Conf. MEMS, Hong Kong, China, January 24-28, 2010, pp.1195-1198.
    (PDF 984 kbytes)
  5. Hasegawa. Y., Kasagi, N. and Yamamoto, A.,
    "Phenomenological Heat Transfer Model of Micro Two-Phase Slug Flow without Phase Change,"
    Proc. 7th Int. Conf. Multiphase Flow (ICMF 2010), Tampa, U.S., May. 30-Jun. 4, 2010, Paper No. 4.6.3 (DVD).
    (PDF 380 kbytes)
  6. Yakeno, A. Hasegawa, Y. and Kasagi, N.,
    "Interpretation of the optimal frequency for skin friction drag reduction with spanwise wall-oscillation control,"
    Proc. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM8), Marseille, France, Jun. 9-11, Vol. 2, 2010, pp. 356-361.
    (PDF 1.0 Mbytes)
  7. Okochi, S., Hasegawa, Y., Kasagi, N. and Suzuki, Y.,
    "Active Control of Near-Wall Turbulence with Periodic Forcing by Plasma Actuator",
    Proc. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM6), Marseille, France, Jun. 9-11, Vol. 2, 2010, pp. 663-668.
    (PDF 1.0 Mbytes)
  8. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "Quenching Mechanism Study of Oscillating Flame in Micro Channels Using Phase-locked OH PLIF,"
    33rd Int. Symp. Combustion (Combustion 2010), Beijing, China, Aug. 1-6, 2010, 4C06.
  9. Saiki, Y., Suzuki, Y., and Kasagi, N.,
    "Active Control of Swirling Coaxial Jet Flames with Manipulation of Fuel and Air Mixing Process,"
    33rd Int. Symp. Combustion (Combustion 2010), Beijing, China, Aug. 1-6, 2010, Work-in-progress Poster, W2P081.
  10. Fan, Y., Lin, W., Suzuki, Y., and Kasagi, N.,
    "Investigation of Wall Chemical Effect on Flame Quenching,"
    33rd Int. Symp. Combustion (Combustion 2010), Beijing, China, Aug. 1-6, 2010, Work-in-progress Poster, W4P040.
  11. Kasagi, N., Hasegawa, Y., Fukagata, K. and Iwamoto, K.,
    "Control of Turbulent Transport: Less Friction and More Heat Transfer,"
    Proc. 14th Int. Heat Transfer Conf., IHTC14-23344 (Keynote Paper), Washington D.C., USA, Aug. 8-13, 2010
  12. Usui, S., Nishi, M., Shikazono, N. and Kasagi, N.,
    "Thermal and Electrochemical Cell Design and its Experimental Assessment for Micro SOFC System,"
    Proc. 14th Int. Heat Transfer Conf., IHTC14-23182, Washington D.C., USA, Aug. 8-13, 2010
  13. Han, Y., Shikazono, N. and Kasagi, N.,
    "The Effect of Liquid Film Evaporation on Flow Boiling Heat Transfer in a Micro Tube,"
    Proc. 14th Int. Heat Transfer Conf., IHTC14-22751, Washington D.C., USA, Aug. 8-13, 2010
  14. Hashimoto, S., Chen, N., Suzuki, Y., and Kasagi, N.,
    “Secondary-Flow-Induced Label-Free Continuous Cell Sorting Using Antibody-Immobilized Micro Oblique Grooves,”
    10th Int. Conf. Nanotechnology (IEEE Nano 2010), Seoul, Korea, Aug. 16-19, 2010, TS11, 4pp.
  15. Hasegawa, Y. and Kasagi, N.,
    "Dissimilar Control of Momentum and Heat Transfer in Turbulent Channel Flow,"
    Proc. 8th Euromech Fluid Mechanics Conf. (EFMC8), S7-7, Bad Reichenhall, Germany, Sept. 13-16, 2010
    (PDF 1.5 Mbytes)
  16. Frohnapfel, B., Hasegawa, Y. and Kasagi, N.,
    "Flow Control for Skin Friction Drag Reduction based on Sensing of the Streamwise Wall-Shear Stress,"
    Proc. 8th Euromech Fluid Mechanics Conf. (EFMC8), S4-30, Bad Reichenhall, Germany, Sept. 13-16, 2010
    (PDF 1.1 Mbytes)
  17. Jiao, Z., Shikazono, N. and Kasagi, N.,
    "Comparison of Ultra-fast Microwave Sintering and Conventional Thermal Sintering in Manufacturing of Anode Support Solid Oxide Fuel Cell",
    Proc. JSME Thermal Eng. Conf. 2010, pp. 291-292 (2010)
    (PDF 221 kbytes)
  18. Frohnapfel, B., Stroh, A., Hasegawa, Y. and Kasagi, N.,
    "Feedback Control of Wall Turbulence for Drag Reduction with Finite Spatial and Temporal Resolution,"
    Bulletin of the American Physical Society 58th Annual Meeting of the Division of Fluid Dynamics, Vol. 55, No.16, EJ7 p. 129, Long Beach, U.S. A., Nov. 21-23, 2010
  19. Hasegawa, Y. and Kasagi, N.,
    "Dissimilar Control of Momentum and Heat Transfer in Wall Turbulence with Traveling Wave-Like Wall Blowing and Suction,"
    Bulletin of the American Physical Society 58th Annual Meeting of the Division of Fluid Dynamics, Vol. 55, No.16, EJ10 p. 130, Long Beach, U.S. A., Nov. 21-23, 2010

Back to header


<2009>

  1. Hashimoto, S., Nishimura, T., Miwa, J., Suzuki, Y., and Kasagi, N.,
    "Label-free Continuous Micro Cell Sorter with Antibody-immobilized Oblique Grooves,"
    Proc. 22nd IEEE Int. Conf. MEMS, Sorrento, Italy, January 26-29, 2009, pp. 60-63.
    (PDF 612 kbytes)
  2. Kamezawa, C., Suzuki, Y., and Kasagi, N.,
    "Mechanical Response Evaluation of High-thermally-stable-grade Parylene Spring,"
    Proc. 22nd IEEE Int. Conf. MEMS, Sorrento, Italy, January 26-29, 2009, pp. 615-618.
    (PDF 964 kbytes)
  3. Edamoto, M., Suzuki, Y., Kasagi, N., Kashiwagi, K., Morizawa, Y., Yokoyama, T., Seki, T., and Oba, M.,
    "Low-resonant-frequency Micro Electret Generator for Energy Harvesting Application,"
    Proc. 22nd IEEE Int. Conf. MEMS, Sorrento, Italy, January 26-29, 2009, pp. 1059-1062.
    (PDF 540 kbytes)
  4. Frohnapfel, B., Hasegawa, Y. and Kasagi, N.,
    "Effect of Near-Wall Componental Modification of Turbulence on Its Statistical Properties,"
    2nd Int. Conf. on Turbulence and Interaction (TI2009), Sainte-Luce, Martinique, May 31- Jun. 5, 2009, 7 pp.
    (PDF 420 kbytes)
  5. Yakeno, A. Hasegawa, Y. and Kasagi, N.,
    "Spatio-temporally periodic control for friction drag reduction,"
    Proc. 6th Int Symp. on Turbulence and Shear Flow Phenomena, Seoul, June. 22-24, 2009, pp. 598-603.
    (PDF 1.2 Mbytes)
  6. Frohnapfel, B., Hasegawa, Y., and Kasagi, N.,
    "Friction drag reduction through damping of the near-wall spanwise velocity fluctuation,"
    Proc. 6th Int Symp. on Turbulence and Shear Flow Phenomena, Seoul, Korea, June 22-24, 2009, pp. 749-754.
    (PDF 644 kbytes)
  7. Nagae, K., Saiki, Y., and Kasagi, N.,
    "Mechanism of vortex generation and its contribution to mixing enhancement in a controlled coaxial jet,"
    Proc. 6th Int Symp. on Turbulence and Shear Flow Phenomena, Seoul, Korea, June 22-24, 2009, pp. 823-828.
    (PDF 804 kbytes)
  8. Miki, D., Suzuki, Y., and Kasagi, N.,
    "Effect of Nonlinear External Circuit on Electrostatic Force of Micro Electret Generator,"
    15th Int. Conf. Solid-state Sensors, Actuators, and Microsystems (Transducers' 09), Denver, 2009.6.21-25, pp. 636-639.
    (PDF 552 kbytes)
  9. Okochi, S., Kasagi, N., Suzuki, Y ., and Ito, S.,
    "Development of Micro Plasma Actuator for Active Flow Control,"
    7th World Conf. Exp. Heat Transfer, Fluid Mech. and Thermodyn., Krakow, Poland, June 28-July 03, 2009, pp. 1741-1748.
    (PDF 648 kbytes)
  10. Takagi, N., Nakamura, Y., Shikazono, N. and Kasagi, N.,
    "Microstructure Change of SOFC Anode Caused by Electrochemical Redox Cycles",
    9th European Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, June 29-July 2 2010, 7-135. 
    ÂEÂECITE>PDF 1245 kbytesÂEÂE
  11. Jiao, Z., Shikazono, N. and Kasagi, N.,
    "Advantages of Microwave Sintering in Manufacturing of Anode Support Solid Oxide Fuel Cell",
    9th European Solid Oxide Fuel Cell Forum, Lucerne, Switzerland, June 29-July 2 2010, 5-211.
    ÂEÂECITE>PDF 463 kbytesÂEÂE
  12. Kasagi, N., Hasegawa, Y. and Fukagata, K.,
    "Toward Cost-Effective Control of Wall Turbulence for Skin Friction Drag Reduction,"
    Invited Lecture, 12th Euromech European Turbulence Conference, Marburg, Germany, Sept. 7-10, 2009. Published in "Advances in Turbulence XII", Springer, pp. 189-200, 2009.
    (PDF 501 kbytes)
  13. Frohnapfel, B., Hasegawa, Y., Kasagi, N. and Groβe, S.,
    "Estimation of the Spanwise Wall Shear Stress Based on Upstream Information for Wall Turbulence Control,"
    Proc. 12th Euromech European Turbulence Conference, Marburg, Germany, Sept. 7-10, 2009, pp. 209-212.
    (PDF 408 kbytes)
  14. Hasegawa, Y. and Kasagi, N.,
    "A Unified Model of Turbulent Mass Transfer under Different Interfacial Conditions,"
    Turbulence, Heat and Mass Transfer 6, K. Hanjalic et al. Ed., Begell House, Proc. 6th Int. Symp. Turbulence, Heat and Mass Transfer, Rome, Italy, Sept. 14-18, 2009 (CD-ROM), 8 pp.
    (PDF 136 kbytes)
  15. Saiki, Y., Suzuki, Y., and Kasagi, N.,
    "Active Control of Swirling Coaxial Jet Mixing with Manipulation of Large-scale Vortical Structures,"
    Turbulence, Heat and Mass Transfer 6, K. Hanjalic et al. Ed., Begell House, Proc. 6th Int. Symp. Turbulence, Heat and Mass Transfer, Rome, Italy, Sept. 14-18, 2009 (CD-ROM), 12 pp.
    (PDF 2.7 Mbytes)
  16. H. Iwai, N. Shikazono, T. Matsui, H. Teshima, M. Kishimoto, R. Kishida, D. Hayashi, K. Matsuzaki, D. Kanno, M. Saito, H. Muroyama, K. Eguchi, N. Kasagi, H. Yoshida
    "Quantification of Ni-YSZ Anode Microstructure Based on Dual Beam FIB-SEM Technique,"
    Proc. Solid Oxide Fuel Cells 11 (SOFC-XI), Vienna, Oct. 4-9, 2009, pp.1819-1828.
    (PDF 696 kbytes)
  17. K. Matsuzaki, D. Kanno, H. Teshima, N. Shikazono and N. Kasagi
    "Three-Dimensional Numerical Simulation of Ni-YSZ Anode Polarization Using Reconstructed Microstructure from FIB-SEM Images,"
    Proc. Solid Oxide Fuel Cells 11 (SOFC-XI), Vienna, Oct. 4-9, 2009, pp.1829-1836.
    (PDF 1.6 Mbytes)
  18. Wu, T., Suzuki, Y., and Kasagi, N.,
    "Design and Microfabrication of High Peformance Super-Lyophobic Surfaces,"
    13th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2009), Jeju, Nov. 1-5, 2009, pp. 773-775.
    (PDF 2 Mbytes)
  19. Inokuchi, H., Suzuki, Y., and Kasagi, N.,
    "Micro Magnetic Cell Sorting System with a Function of Continuous Labeling and Separation,"
    13th Int. Conf. Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2009), Jeju, Nov. 1-5, 2009, pp. 1877-1879.
    (PDF 408 kbytes)
  20. Kirikae, D., Suzuki, Y., and Kasagi, N.,
    "Emission Spectral Control Using Metal-coated Silicon Microcavity for Thermophotovoltaic,"
    The 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009), Washington DC, USA, Dec. 1-4, 2009, pp.161-164.
    (PDF 952 kbytes)
  21. Miki, D., Honzumi, M., Suzuki, Y., and Kasagi, N.,
    "MEMS Electret Generator with Electrostatic Levitation,"
    The 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009), Washington DC, USA, Dec. 1-4, 2009, pp.169-172.
    (PDF 508 kbytes)
  22. Hagiwara, K., Honzumi, M., Goto, M., Tajima, T., Yasuno, Y., Kodama, H., Kidokoro, K., Kashiwagi, K., and Suzuki, Y.,
    "Novel Through-substrate Charging Method for Electret Generator Using Soft X-ray Irradiation,"
    The 9th International Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2009), Washington DC, USA, Dec. 1-4, 2009, pp.173-176.
    (PDF 304 kbytes)

Back to header


<2008>

  1. Tsurumi, Y., Suzuki, Y., and Kasagi, N.,
    "Non-Contact Electrostatic Micro-Bearing Using Polymer Electret,"
    Proc. IEEE Int. Conf. MEMS 2008, Tucson, Arizona, January 13-17, 2008, pp. 511-514.
    (PDF 1.6 Mbytes)
  2. Wu, T., Suzuki, Y., and Kasagi, N.,
    "Electrostatic Droplet Manipulation Using Electret as a Voltage Source,"
    Proc. IEEE Int. Conf. MEMS 2008, Tucson, Arizona, January 13-17, 2008, pp. 591-594.
    (PDF 644 kbytes)
  3. Fukagata, K., Kobayashi, M., and Kasagi, N.,
    "Manipulation of the large-scale structure in wall turbulence for turbulent wall-friction-drag reduction,"
    Proc. 7th International Symposium on Engineering Turbulence Modelling and Mesurements, Limassol, Cyprus, June 4-6, 2008, pp. 131-136.
    (PDF 564 kbyte).
  4. Hasegawa, Y. and Kasagi, N.,
    "Low-pass filtering effects of viscous sulayer on high Schmidt number mass transfer close to a solid wall,"
    Proc. 7th International Symposium on Engineering Turbulence Modelling and Mesurements, Limassol, Cyprus, June 4-6, 2008, pp. 280-285.
    (PDF 840 kbyte).
  5. Nakagawa, T., Shikazono, N. and Kasagi, N.,
    "Numerical Simulation of Electrochemical Reaction in Reconstructed Three-Dimensional LSM/YSZ Composite Cathode,"
    Proc. 6th Int. Conf. Fuel Cell Science, Engineering and Technology (FUELCELL2008), Denver, Colorado, June 16-18, 2008, Paper No. FUELCELL2008-65027, 9 pp.
    (PDF 1.5 Mbytes)
  6. Sakamoto, Y., Shikazono, N. and Kasagi, N.,
    "Effects of Electrode Microstructure on Polarization Characteristics of SOFC Anodes,"
    Proc. 6th Int. Conf. Fuel Cell Science, Engineering and Technology (FUELCELL2008), Denver, Colorado, June 16-18, 2008, No. FUELCELL2008-65079, 6 pp.
    (PDF 864 kbytes)
  7. Kamezawa, C., Suzuki, Y., and Kasagi, N.,
    "In-situ Strain Monitoring of Micromachined Parylene Spring for Fatigue Test,"
    Proc. 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT 2008), Taiwan, June 22-25, 2008, 2D1-1, 4pp.
    (PDF 1.5 Mbytes)
  8. Edamoto, M., Suzuki, Y., and Kasagi, N.,
    "Electret-based Energy Harvesting Device with Parylene Flexible Springs,"
    Proc. 4th Asia-Pacific Conference on Transducers and Micro-Nano Technology 2008 (APCOT 2008), Taiwan, June 22-25, 2008, 2B3-1, 4pp.
    (PDF 796 kbytes)
  9. Shilder, B., Yu, S. C. M., Kasagi, N., Hardt, S., and Stephan, P.,
    "Local Measurement of Forced Convection Heat Transfer in a Micro Glass Tube,"
    Proc. 6th Int. Conf. Nanochannels, Microchannels and Minichannels (ICNMM2008), Darmstadt, Germany, June 23-25, 2008, Paper No. ICNMM2008-62054, 8pp.
    (PDF 516 kbytes)
  10. He, Q., and Kasagi, N.,
    "Numerical Investigation on Flow Pattern and Pressure Drop Characteristics of Slug Flow in a Micro Tube,"
    Proc. 6th Int. Conf. Nanochannels, Microchannels and Minichannels (ICNMM2008), Darmstadt, Germany, June 23-25, 2008, Paper No. ICNMM2008-62225, 9pp.
    (PDF 1.6 Mbytes)
  11. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "Experimental Study of Micro-scale Premixed Flame in Quartz Channels,"
    32nd Int. Symp. Combustion (Combustion 2008), Montreal, Canada, August 3-8, 2008, Book of Abstract, p. 18, 1E09.
  12. Kamijo, T., Suzuki, Y., Kasagi, N., and Okamasa, T.,
    "High-temperature Micro Catalytic Combustor with Pd/Nano-porous Alumina,"
    32nd Int. Symp. Combustion (Combustion 2008), Montreal, Canada, August 3-8, 2008, Book of Abstract, p. 57, 2C05.
  13. Hasegawa, Y., and Kasagi, N.,
    "Effects of Interfacial Wave on Turbulent Mass Transfer in Open Channel Flow,"
    XXII Int. Cong. Theoretical and Applied Mechnics, Adelaide, Australia, August 24-29, 2008, 2pp.
    (PDF 1.7 Mbytes)
  14. Frohnapfel, B., Lammers, P., Hasegawa, Y., and Kasagi, N.,
    "Flow Control by Turbulence State Modifications in the Near-Wall Region,"
    XXII Int. Cong. Theoretical and Applied Mechnics, Adelaide, Australia, August 24-29, 2008, 2pp.
    (PDF 264 kbytes)
  15. Sakane, Y., Suzuki, Y., and Kasagi, N.,
    "Development of High-performance Purfluorinated Polymer Electret,"
    13th Int. Symp. Electrets, Tokyo, September 15-17, 2008, p. 13.
    (PDF 144 kbytes)
  16. Suzuki, Y., Edamoto, M., Kasagi, N., Kashiwagi, K., and Morizawa, Y.,
    "Micro Power Generator with High-performace Polymer Electret ,"
    13th Int. Symp. Electrets, Tokyo, September 15-17, 2008, p. 53.
    (PDF 132 kbytes)
  17. He, Q., Hasegawa, Y., and Kasagi, N.,
    "Numerical Study on Convective Heat Transfer of Gas-Liquid Slug Flow in a Micro Tube"
    Proc. ECI Conf. on Heat Transfer and Fluid Flow in Microscale, Whistler, Canada, Septempber 21-26, 2008 (CD-ROM), Paper 14, 8 pp.
    (PDF 812 kbytes)
  18. Kamijo, T., Suzuki, Y., and Kasagi, N.,
    "Micro Catalytic Combustor with Pd/Nano-porous Alumina for High-Temperature Application"
    Proc. the 7th JSME-KSME Thermal Fluids Engineering Conference (TFEC-7), Sapporo, Japan, October 13-16, 2008, Paper No. C124, 2pp.
    (PDF 972 kbytes)
  19. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "On Flame-Wall Thermal-Coupling in Micro Combustors,"
    Proc. the 7th JSME-KSME Thermal Fluids Engineering Conference (TFEC-7), Sapporo, Japan, October 13-16, 2008, Paper No. C125, 2pp.
    (PDF 1.2 Mbytes)
  20. Hasegawa, Y., and Kasagi, N.,
    "Effects of Spanwise Wall Disturbance on Heat and Momentum Transfer in Turbulent Channel Flow,"
    Proc. the 7th JSME-KSME Thermal Fluids Engineering Conference (TFEC-7), Sapporo, Japan, October 13-16, 2008, Paper No. M142, 2pp.
    (PDF 636 kbytes)
  21. Wu, T., Suzuki, Y. and Kasagi, N.,
    "Modeling for Droplet Manipulation Based on "L-DEP on Electret","
    Proc. 25nd Sensor Symp., Okinawa, Japan, October 22-24, 2008, pp. 785-786.
    (PDF 454 kbytes)
  22. Inokuchi, H., Suzuki, Y. and Kasagi, N.,
    "Development of Micro Immuno-Magnetic Cell Sorting System with Lamination Mixer and Magnetic Separator,"
    Proc. 25nd Sensor Symp., Okinawa, Japan, October 22-24, 2008, pp. 851-852.
    (PDF 408 kbytes)
  23. Nishimura, T., Miwa, J., Hashimoto, S., Suzuki, Y. and Kasagi, N.,
    "Flow-Through Cell Separation Using Antigen-Antibody Interaction Between Cell and Wall Surface,"
    Proc. 25nd Sensor Symp., Okinawa, Japan, October 22-24, 2008, pp. 853-854.
    (PDF 711 kbytes)
  24. Suzuki, Y.,
    "Energy Harvesting from Vibration Using Polymer Electret,"
    IEEE Int. Symp. Micro-NanoMechatoronics and Human Science (MHS2008), Nagoya, Japan, November 8, 2008, Invited talk, pp. 180-183.
    (PDF 900 kbytes)
  25. Suzuki, Y., Edamoto, M., Kasagi, N., Kashiwagi, K., Morizawa, Y., Yokoyama, T., Seki, T., and Oba, M.,
    "Micro Electret Energy Harvesting Device with Analogue Impedance Conversion Circuit,"
    8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008), Sendai, Japan, November 9-12, 2008, pp. 7-10.
    (PDF 2.7 Mbytes)
  26. Kirikae, D., Suzuki, Y., and Kasagi, N.,
    "Effect of Microcavity Profile on the Selective Emitter Performance for Thermophotovoltaic,"
    8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008), Sendai, Japan, November 9-12, 2008, pp. 369-372.
    (PDF 685 kbytes)
  27. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "Ultra-Thin Quartz Combustors for TPV Power Generation,"
    8th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2008), Sendai, Japan, November 9-12, 2008, pp. 433-436.
    (PDF 400 kbytes)

Back to header


<2007>

  1. Miwa, J., Suzuki, Y., and Kasagi, N.,
    "Adhesion-based Cell Sorter with Antibody-Immobilized Amino-parylene,"
    Proc. IEEE Int. Conf. MEMS 2007, Kobe, (2007), pp. 27-30.
    (PDF 1.0 Mbytes)
  2. Tsutsumino, T., Suzuki, Y., Sakurai, N., Kasagi, N., and Sakane, Y.,
    "Nano-metal Ink Based Electrode Embedded in Parylene Structures with the Aid of the Capillary Effect,"
    Proc. IEEE Int. Conf. MEMS 2007, Kobe, (2007), pp. 313-316.
    (PDF 396 kbytes)
  3. Takagi, D., Suzuki, Y., and Kasagi, N.,
    "Pyrolyzed Parylene Structure as Selective Emitter for High-Efficiency Thermophotovoltaic,"
    Proc. IEEE Int. Conf. MEMS 2007, Kobe, (2007), pp. 883-886.
    (PDF 256 kbytes)
  4. Suzue, Y., Shikazono, N., and Kasagi, N.,
    "Modeling of SOFC Anodes Based on the Stochastic Reconstruction Scheme,"
    Proc. Solid Oxide Fuel Cells 10, Nara, (2007), pp. 2049-2055.
    (PDF 353 kbytes)
  5. Tsutsumino, T., Suzuki, Y., and Kasagi, N.,
    "Electromechanical Modeling of Micro Electret Generator for Energy Harvesting,"
    Proc. 14th Int. Conf. Solid-State Sensors, Actuators and Microsystems, Vol.2, (2007), Lyon, pp. 863-866.
    (PDF 424 kbytes)
  6. Hayashi, S., Kasagi, N., and Suzuki, Y.,
    "The effects of inlet flow conditions on gas-liquid two-phase flow in a micro tube,"
    Proc. HT2007 & 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference, July 8-12, 2007, Vancouver, British Columbia, CANADA, Paper No. HT2007-32916, 8 pp.
    (PDF 2.9 Mbytes)
  7. He, Q., Fukagata, K., and Kasagi, N.,
    "Numerical simulation of gas-liquid two-phase flow and heat transfer with dry-out in a micro tube,"
    Proc. 6th Int. Conf. on Multiphase Flow (ICMF 2007), Leipzig, Paper No. S7_Wed_C_40, 12 pp.
    (PDF 2.4 Mbytes)
  8. Fukagata, K, Kern, S., Chatelain, P., Koumoutsakos, P., and Kasagi, N.,
    "Optimization of an anisotropic compliant surface for turbulent friction drag reduction,"
    Proc. 5th Int Symp. on Turbulence and Shear Flow Phenomena, Munich, Aug. 27-29, 2007, pp. 727-732.
    (PDF 968 kbytes)
  9. Hasegawa, Y., and Kasagi, N.,
    "Systematic Analysis of High Schmidt Number Turbulent Mass Transfer across Clean, Contaminated and Solid Interfaces,"
    Proc. 5th Int Symp. on Turbulence and Shear Flow Phenomena, Munich, Aug. 27-29, 2007, pp. 1167-1172.
    (PDF 2.9MB bytes)
  10. Shikazono, N., Okawa, D., Kobayashi, M., Kasagi, N., Waki, T. , Kandori, I. and Hataya, S.,
    "Research and Development of High-Performance Compact Finless Heat Exchanger,"
    Proc. 6th Int. Conf. on Enhanced, Compact and Ultra-Compact Heat Exchangers: Science, Engineering and Technology, Potsdam, Germany, Sep. 16-21 2007, CHE2007-0017.
    (PDF 328 kbytes)
  11. Suzuki, Y.,
    "Micro Energy Technology Research in Japan,"
    Invited talk, 2nd Fraunhofer Symp. Micro Energy Technology, Freiburg, Nov. 27, 2007.
  12. Sakane Y., Suzuki, Y., and Kasagi, N.,
    "High-performance Perfluorinated Polymer Electret Film for Micro Power Generation,"
    7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Nov. 28-29, 2007, pp. 53-56.
    (PDF 312 kbytes)
  13. Marboutin, C., Suzuki, Y., and Kasagi, N.,
    "Optimal Design of Micro Electret Generator for Energy Harvesting,"
    7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Nov. 28-29, 2007, pp. 141-144.
    (PDF 300 kbytes)
  14. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "Flame Propagation and Quenching in Ultra-Thin Quartz Combustors,"
    7th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2007), Freiburg, Nov. 28-29, 2007, pp. 265-268.
    (PDF 520 kbytes)

Back to header


<2006>

  1. Tsutsumino, T., Suzuki, Y., Kasagi, N., Sakane, Y.,
    "Seismic Power Generator Using High-Performance Polymer Electret,"
    Proc. Int. Conf. MEMS'06, Jun. 2006, Istanbul, pp.98-101
    (PDF 212 kbytes)
  2. Fukagata, K., Iwamoto, K., and Kasagi, N.,
    "Dissimilar control of turbulent friction drag and heat transfer based on the implication of stress and flux identity equations,"
    Proc. Whither Turbulence Prediction and Control, March 26-29, Seoul, Korea, pp. 74-75.
    (PDF 152 kBytes)
  3. Kasagi, N.,
    Invited Lecture, "Advanced control of turbulent shear flows with micro devices,"
    Proc. Whither Turbulence Prediction and Control, March 26-29, Seoul, Korea, pp. 120-121.
  4. Miwa, J., Suzuki, Y., and Kasagi, N.,
    "Evaluation of Cell Velocity Regulation in a Microfabricated Adhesion-Based Cell Separation Device,"
    Proc. 2006 Int. Conf. Microtechnologies in Medicine and Biology, Okinawa, Japan, May 9-12, 2006, pp. 101-104.
    (PDF 1.2 Mbytes)
  5. Inokuchi, H., Nagae, K., Suzuki, Y., Kasagi, N., and Shikazono, N.,
    "Evaluation of Lamination Micro Mixer for Micro Immunomagnetic Cell Sorter,"
    Proc. 2006 Int. Conf. Microtechnologies in Medicine and Biology, Okinawa, Japan, May 9-12, 2006, pp. 131-134.
    (PDF 1.0 Mbytes)
  6. Suzuki, M., Shikazono, N., Fukagata, K., and Kasagi, N.,
    "Numerical analysis of heat/mass transfer and electrochemical reaction in an anode-supported flat-tube solid oxide fuel cell,"
    Proc. 4th Int. Conf. Fuel Cell Science, Engineering and Technology (FUELCELL2006), Irvine, California, June 19-21, 2006, Paper No. FUELCELL2006-97112, 9 pp.
    (PDF 795 kbytes)
  7. Saiki, Y., Suzuki, Y., and Kasagi, N.,
    "The Structure of a Bluff-body Held Flame Controlled by Arrayed Micro Actuators,"
    Proc. 17th Int. Symp. Transport Phenomena, September 4-8, 2006, Paper No. 2-D-II-4
    (PDF 712 kbytes)
  8. Suzue Y., Morimoto K., Shikazono N., Suzuki Y. and Kasagi N.,
    "High Performance Heat Exchanger with Oblique-Wave Walls,"
    Proc. 13th International Heat Transfer Conference, August 13-18, Sydney, Australia, HEX-24.
    (PDF 984 kbytes)
  9. Hasegawa, Y. and Kasagi, N.,
    "Effects of Interfacial Velocity Boundary Condition on Turbulent Mass Transfer at high Schmidt Numbers,"
    Proc. Turbulence, Heat and Mass Transfer 5, Dubrovnik, Croatia, September 25-29, 2006 (CD-ROM), 11 pp.
    (PDF 242 kbytes)
  10. Kasagi, N., Fukagata, K., and Suzuki, Y.,
    Plenary Lecture: "Toward feedback control of wall turbulence for skin friction,"
    Proc. Conf. on Active Flow Control, Berlin Germany, September 27-29, 2006 (CD-ROM), 19 pp.
    (PDF 3.5 Mbytes)
  11. Chaktranond, C., Fukagata, K. and Kasagi, N.,
    "Mixing enhancement in a lamination micro mixer for cell sorting,"
    Proc. 20th Conference of Mechanical Engineering Network of Thailand 18-20 October 2006, Nakhon Ratchasima, Thailand, 6 pp.
    (PDF 588 kbytes).
  12. Tsutsumino, T., Suzuki, Y., Kasagi, N., Kashiwagi, K. and Morizawa, Y.,
    "Micro Seismic Electret Generator for Energy Harvesting,"
    Proc. 5th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2006), Berkeley, pp.279-282.
    (PDF 193 kbytes).
  13. Okamasa, T., Suzuki, Y. and Kasagi, N.,
    "Non-uniform Heat Generation in Micro Catalytic Combustor"
    Proc. 5th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2006), Berkeley, pp.21-24.
    (PDF 236 kbytes).

Back to header


<2005>

  1. Kasagi, N., Kawaguchi, Y., Yoshida, H., Kodama, Y., and Ogawa, S.,
    "Progress in smart control of turbulece,"
    Proc. 6th Symp. Smart Control of Turbulence, March 6-9, 2005, Tokyo, pp. 1-16.
    (PDF 2.0 Mbytes)
  2. Suzuki, Y., Yoshino, T., Yamagami, T., and Kasagi, N.,
    Plenary Lecture, "Drag redcution in a turbulent channel flow by using a GA-based feedback control system,"
    Proc. 6th Symp. Smart Control of Turbulence, March 6-9, 2005, Tokyo, pp. 31-40.
    (PDF 670 kbytes)
  3. Yamagami, T., Suzuki, Y., and Kasagi, N.,
    "Development of feedback control system of wall turbulence using MEMS devices,"
    Proc. 6th Symp. Smart Control of Turbulence, March 6-9, 2005, Tokyo, pp. 135-141.
    (PDF 1.8 Mbytes)
  4. Fukagata, K., Kasagi, N., and Sugiyama, K.,
    "Feedback control achieving sublaminar friction drag,"
    Proc. 6th Symp. Smart Control of Turbulence, March 6-9, 2005, Tokyo, pp. 143-148.
    (PDF 400 kbytes)
  5. Iwamoto, K., Kasagi, N., and Suzuki, Y.,
    "Direct numerical simulation of turbulent channel flow at Reτ = 2320,"
    Proc. 6th Symp. Smart Control of Turbulence, March 6-9, 2005, Tokyo, pp. 327-333.
    (PDF 831 kbytes)
  6. Kasagi, N.,
    Plenary Lecture, "Miniaturization, decentralization, mobilization and process intensification in thermal and fluids engineering,"
    Proc. 6th KSME-JSME Thermal and Fluids Engineering Conference, March 20-23, 2005, Jeju, Korea (CD-ROM), Paper AB.01, 2 pp.
  7. Morimoto, K., Suzuki, Y., and Kasagi, N.,
    "Optimal shape design of recuperators with oblique wavy walls,"
    Proc. 6th KSME-JSME Thermal and Fluids Engineering Conference, March 20-23, 2005, Jeju, Korea (CD-ROM), Paper DD.02, 4 pp.
    (PDF 1.0 Mbytes)
  8. Suzuki, M., Fukagata, K., Shikazono, N., and Kasagi, N.,
    "Numerical analysis of temperature and potential distributions in planar-type SOFC,"
    Proc. 6th KSME-JSME Thermal and Fluids Engineering Conference, March 20-23, 2005, Jeju, Korea (CD-ROM), Paper KJ.01, 4 pp.
    (PDF 565 kbytes).
  9. Angele, K. P.,Kurimoto, N., Suzuki, Y., and Kasagi, N.,
    "Three-dimensional vortical structures in a coaxial jet manipulated with micro-actuators,"
    Proc. 6th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, April 17-21, Matsushima, Japan (CD-ROM), Paper 9-b-10, 7 pp.
    (PDF 836 kbytes)
  10. Yen T.-H., Suzuki, Y., and Kasagi, N.,
    "Modeling on Convective Boiling Heat transfer in a micro tube based on Flow visualization,"
    Proc. 6th World Conf. Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, April 17-21, Matsushima, Japan (CD-ROM), Paper 4-a-9, 6 pp.
    (PDF 310 kbytes)
  11. Kasagi, N., Fukagata, K. and Suzuki, Y.,
    Keynote Lecture, "Adaptive control of wall-turbulence for skin friction drag reduction and some consideration for high Reynolds number flows,"
    Proc. 2nd Int. Symp. on Seawater Drag Reduction, Busan, Korea, May 2005, pp. 17-32.
    (PDF 2.0 Mbytes)
  12. Shikazono, N., Suehisa, Y., Kasagi, N., and Iwata, H.,
    "Modeling and design of micro-grooved flat plate evaporator,"
    Proc. 3rd Int. Conf. Microchannels and Minichannels (ICMM2005), Toronto, Ontario, Canada, June 13-15, 2005 (CD-ROM), Paper No. ICMM2005-75141, 8 pp.
    (PDF 456 kbytes)
  13. Yen, T.-H., Shoji, M., Takemura, F., Suzuki, Y., and Kasagi, N.,
    "Visualization of Convective Boiling Heat Transfer in Single Micro-Conduits with Different Shapes of Cross Sections,"
    Proc. 3rd Int. Conf. Microchannels and Minichannels (ICMM2005), Toronto, Ontario, Canada, June 13-15, 2005 (CD-ROM), Paper No. ICMM2005-75228, 8 pp.
    (PDF 123 kbytes)
  14. Suzuki, Y., Yoshino, T., Yamagami, T., and Kasagi, N.,
    "GA-based feedback control system for drag reduction in turbulent channel flow,"
    Proc. 4th Int. Symp. Turbulence and Shear Flow Phenomena (TSFP-4), Williamsburg, Virginia, June 27-29, 2005, pp. 301-306.
    (PDF 5.0 Mbytes)
  15. Fukagata, K., Iwamoto, K., and Kasagi, N.,
    "Novel turbulence control strategy for simultaneously achieving friction drag reduction and heat transfer augmentation,"
    Proc. 4th Int. Symp. Turbulence and Shear Flow Phenomena (TSFP-4), Williamsburg, Virginia, June 27-29, 2005, pp. 307-312.
    (PDF 322 kbytes)
  16. Mitsuishi, A., Fukagata, K., and Kasagi, N.,
    "On the relationship between large-scale vortical structure and scalar transport processes in a controlled confined coaxial jet,"
    Proc. 4th Int. Symp. Turbulence and Shear Flow Phenomena (TSFP-4), Williamsburg, Virginia, June 27-29, 2005, pp. 841-846.
    (PDF 1.0 Mbytes)
  17. Hasegawa, Y. and Kasagi, N.,
    "Turbulent mass transfer mechanism across a contaminated air-water interface,"
    Proc. 4th Int. Symp. Turbulence and Shear Flow Phenomena (TSFP-4), Williamsburg, Virginia, June 27-29, 2005, pp. 971-976.
    (PDF 864 kbytes)
  18. Fukagata, K., Kasagi, N., and Suzuki, Y.,
    "Feedback control system for friction drag reduction in wall-turbulence"
    1st Int. Closed-Loop Flow Control Workshop, Jackson Hole, Wyoming, July 18-19, 2005.
    (PDF (Abstract) 26 kbytes)
  19. Miwa, J., Tan, W. H., Suzuki, Y., Kasagi, N., Shikazono, N., Furukawa, K. and Ushida, T.,
    "Development of micro immunoreaction-based cell sorter for regenerative medicine,"
    Proc. 1st Intl. Conf. BNI Fusion, Marina del Rey, CA, USA, Jul. 20-22, 2005.
    (PDF 2.0 Mbytes)
  20. Morimoto, K., Suzuki, Y., and Kasagi, N.,
    "Optimal Shape Design of Counter-Flow Primary Surface Recuperators,"
    Proc. 5th Int. Conf. Enhanced, Compact and Ultra-Compact Heat Exchangers, Whistler, BC, Canada, Sep. 11-16, 2005 (CD-ROM), Paper CHE2005-17, pp. 124-131.
    (PDF 1.1 Mbytes)
  21. Ua-arayaporn, P., Fukagata, K., Kasagi, N., and Himeno, T.,
    "Numerical simulation of gas-liquid two-phase convective heat transfer in a micro tube"
    Proc. ECI Conf. on Heat Transfer and Fluid Flow in Microscale, Castelvecchio Pascoli, Italy, Sep. 25-30, 2005 (CD-ROM), Paper 50, 6 pp.
    (PDF 509 kbytes)
  22. Kasagi, N.,
    Keynote Lecture, "Toward Smart Control of Turbulent Jet Mixing and Combustion,"
    Proc. Int. Conf. Jets, Wakes and Separated Flows (ICJWSF-2005), Toba, JSME, Oct. 5-8, 2005, pp. 45-53.
    (PDF 1.5 Mbytes)
  23. Miwa, J., Suzuki, Y. and Kasagi, N.,
    "Adhesion-Based Cell Velocity Regulation in an Antibody-Coated Micro Column for Stem Cell Separation,"
    Proc. 9th Int. Conf. Miniaturised Systems for Chemistry and Life Sciences (μTAS2005), Boston, MA, USA, Oct. 9-13, 2005, pp. 868-870.
    (PDF 500 kbytes)
  24. Inokuchi, H., Suzuki, Y., Kasagi, N., Shikazono, N., Furukawa, K., and Ushida, T.,
    "Micro Magnetic Separator for Stem Cell Sorting System,"
    Proc. 22nd Sensor Symp., Tokyo, Oct. 20-21, 2005, pp. 125-128.
    (PDF 737 kbytes)
  25. Kasagi, N.,
    "Innovation of Engineering Research and Education: A Challenge for a Better Society,"
    Keynote Lecture, Joint Symposium on Engineering Research and Education between SNU (Seoul National Univ.)-TU (Tsinghua Univ.)-UT (Univ. Tokyo), Nov. 9, 2005, The University of Tokyo.
  26. Angele, K.P., Suzuki, Y., Miwa, J., Kasagi, N. and Yamaguchi, Y.
    "Development of a High-speed Scanning Micro-PIV system,"
    Proc. 6th International Symposium on Particle Image Velocimetry Pasadena, California, USA, September 21-23, 2005.
    (PDF 845 kbytes)
  27. Tsutsumino, T., Suzuki, Y., Kasagi, N., and Tsurumi, Y.
    "High-Performance Polymer Electret for Micro Seismic Generator,"
    Proc. 5th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Nov. 28-30, 2005, Tokyo, pp. 9-12.
    (PDF 180 kbytes)
  28. Fan, Y., Suzuki, Y., and Kasagi, N.,
    "Development of Large-entrainment-ratio Micro Ejector for Catalytic Combustor,"
    Proc. 5th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Nov. 28-30, 2005, Tokyo, pp. 132-135.
    (PDF 264 kbytes)
  29. Okamasa, T., Lee, G.-G., Suzuki, Y., and Kasagi, N.,
    "Development of Micro Catalytic Combustor Using Ceramic Tape Casting,"
    Proc. 5th Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2005), Nov. 28-30, 2005, Tokyo, pp. 206-209.
    (PDF 224 kbytes)
  30. Ahn, J., Iwamoto, K., Fukagata, K. and Kasagi, N.,
    "Drag reduction with blowing and suction from a pair of oblique slots on the wall,"
    American Physical Society 58th Annual Meeting of the Division of Fluid Dynamics Bull. Am. Phys. Soc., Vol. 50, No.9 (2005), p. 297.
    (PDF 45 kbytes)

Back to header


<2004>

  1. Suzuki, Y., Horii, Y., Kasagi, N., and Matsuda, S.,
    "Micro catalytic combustor with tailored porous alumina,"
    Proc. 17th IEEE Int. Conf. MEMS2004, Jan. 2004, Maastricht, pp. 312-315.
    (PDF 1.3 Mbytes).
  2. Pimpin, A., Suzuki, Y., and Kasagi, N.,
    "Micro electrostrictive actuator with metal compliant electrodes for flow control applications,"
    Proc. 17th IEEE Int. Conf. MEMS2004, Jan. 2004, Maastricht, pp. 478-481.
    (PDF 425 kbytes).
  3. Kasagi, N.,
    Invited talk, "Energy Innovation: Toward Distributed/Mobile/Micro Systems,"
    1st Int. Symp. on Relief Creation by RT, Feb. 2004, Tokyo.
  4. Park, J., Yoshino, T., Yamagami, T., Suzuki, Y. and Kasagi, N.,
    "Development of GA-based Evolved System for Feedback Control of Turbulence,"
    Proc. 5th Symp. on Smart Control of Turbulence, Feb./March 2004, Tokyo, pp. 111-117.
    (PDF 2.1 Mbytes).
  5. Iwamoto, K., Fukagata, K., Kasagi, N. and Suzuki, Y.,
    "DNS of turbulent channel flow at Re_tau=1160 and evaluation of feedback control at practical Reynolds numbers,"
    Proc. 5th Symp. on Smart Control of Turbulence, Feb./March 2004, Tokyo, pp. 119-125.
    (PDF 295 kbytes).
  6. Kasagi, N.,
    Plenary lecture, "The 21st Century COE Program: Mechanical Systems Innovation,"
    1st Int. Symp. on Mechanical Systems Innovation, March 2004, Tokyo.
  7. Yen, T.-H., Kasagi, N. and Suzuki, Y.,
    "Effects of fluid properties and system pressure on convective boiling in microtubes,"
    Proc. 1st Int. Symp. on Micro & Nano Technology, March 2004, Honolulu, Hawaii (CD-ROM), Paper VII-1-03, 6 pp.
    (PDF 251 kbytes).
  8. Chaktranond, C., Fukagata, K. and Kasagi, N.,
    "Mixing enhancement in a micro serpentine conduit for cell sorting,"
    Proc. 5th Int. Conf. on Multiphase Flow, May/June 2004, Yokohama, Paper No. 405, 9 pp.
    (PDF 1.6 Mbytes).
  9. Hasebe, S., Shikazono, N. and Kasagi, N.,
    "Modeling and Design of Micro Groove Falling Film Evaporators,"
    Proc. 2nd Int. Conf. on Microchannels and Minichannels, June 17-19, 2004, Rochester, New York, pp. 453-460.
    (PDF 172 kbytes).
  10. Kurimoto, N., Suzuki, Y. and Kasagi, N.,
    "Coaxial Jet Control for Lifted Flame Stabilization with Arrayed Miniature Actuators,"
    Proc. 12 th international symposium on Applications of Laser Techniques to Fluid Mechanics, July 2004, Lisbon, CD-ROM publication, 30-2, 12 pp.
    (PDF 3.4 Mbytes).
  11. Tan, W.-H., Suzuki, Y., Kasagi, N., Shikazono, N., Furukawa, K., and Ushida, T.,
    "Development of Novel Micro Mixer and Its Application to μ-Immunomagnetic Cell Sorter,"
    Proc. 8th Int. Conf. Miniaturised Systems for Chemistry and Life Sciences (μTAS2004), Malmö, Sweden, (2004), Vol. 1, pp. 156-158.
    (PDF 155 kbytes).
  12. Iwamoto, K., Kasagi, N., and Suzuki, Y.,
    "Dynamical Roles of Large-Scale Structures in Turbulent Channel Flow,"
    Computational Mechanics, WCCM VI in conjunction with APCOM'04, Sept. 5-10, 2004, Beijing, China, MS022-174.
    (PDF 2.0 Mbytes).
  13. Fukagata, K., Kasagi, N., and Chaktranond, C.,
    "Lagrangian chaos in a micro serpentine mixer for immunomagnetic cell sorting,"
    Proc. Transport Phenomena in Micro and Nanodevices, October 2004, Kona Coast, Hawaii (CD-ROM), Paper No. ii-5, 6 pp.
    (PDF 1.8 Mbytes).
  14. Iwamoto, K., Kasagi, N., and Suzuki, Y.,
    "DNS of Moderately High Reynolds Number Turbulent Channel Flow,"
    2nd Int. Workshop on Wall-Bounded Turbulent Flows, Nov. 2-5, 2004, Trieste, Italy.
  15. Fukagata, K. and Kasagi, N.,
    "Feedback control of near-wall Reynolds shear stress in wall-turbulence"
    Proc. 4th Int. Symp. on Advanced Fluid Information and Transdisciplinary Fluid Integration, November 2004, Sendai, pp. 346-351.
    (PDF 180 kbytes).
  16. Angele, K., Kurimoto, N., Suzuki, Y., and Kasagi, N.,
    "Active mixing control in a coaxial-jet"
    Bull. Am. Phys. Soc., Vol. 49, No. 9 (2004), p. 53.
    (Abstract PDF 70 kbytes).
  17. Fukagata, K. and Kasagi, N.,
    "Active feedback control achieving sub-laminar skin friction drag"
    Bull. Am. Phys. Soc., Vol. 49, No. 9 (2004), p. 92.
    (Abstract PDF 33 kbytes).
  18. Yen, T.-H., Suzuki, Y., and Kasagi, N.,
    "Visualization of convective boiling in a micro tube with simultaneous measurement of local heat transfer,"
    Proc. 1st Int. Forum Heat Transfer, November 2004, Kyoto, pp. 119-120.
    (PDF 202 kbytes).
  19. Arakawa, Y., Suzuki, Y., and Kasagi, N.,
    "Micro seismic power generator using electret polymer film,"
    Proc. 4th. Int. Workshop on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (Power MEMS 2004), November 28 -30, 2004, Kyoto, pp. 187-190.
    (PDF 115 kbytes).
  20. Kasagi, N.,
    "Mechanical systems innovation,"
    Int. Symp. on Micro/Nano Thermal and Fluids Systems, Int. Symp. Series on Mechanical Systems Innovation, December 6-7, 2004, Tokyo.
  21. Suzuki, Y.,
    "Flow visualization of microscale flow boiling and development of micro reactor,"
    Int. Symp. on Micro/Nano Thermal and Fluids Systems, Int. Symp. Series on Mechanical Systems Innovation, December 6-7, 2004, Tokyo.
  22. Kasagi, N.,
    Invited talk, "The FIK identity and its implication to control strategy for turbulent skin friction reduction,"
    Transition & Turbulence Control, Wall-Bounded and Free-Surface Turbulence and its Computation, December 8-10, 2004, NUS, Singapore.

Back to header


<2003>

  1. Yoshino, T., Suzuki, Y., Kasagi, N. and Kamiunten, S.,
    "Optimum Design of Micro Thermal Flow Sensor and Its Evaluation in Wall Shear Stress Measurement, "
    Proc. 16th IEEE Int. Conf. MEMS2003, Jan. 2003, Kyoto, pp. 193-196.
    (PDF 788 Kbyte).
  2. Suzuki, Y. and Tai, Y.-C.,
    " Micromachined high-aspect-ratio Parylene beam and its application to low-frequency seismometer,"
    Proc. 16th IEEE Int. Conf. MEMS2003, Jan. 2003, Kyoto, pp. 486-489.
    (PDF 1.9 Mbyte).
  3. Boland, J., Chao, C.-H., Suzuki, Y. and Tai, Y.-C.,
    "Micro electret power generator, "
    Proc. 16th IEEE Int. Conf. MEMS2003, Jan. 2003, Kyoto, pp. 538-541.
  4. Fukagata, K. and Kasagi, N.,
    "Suboptimal turbulence control algorithm for the modification of Reynolds stress in the near-wall layer,"
    Proc. 4th Symp. on Smart Control of Turbulence, Mar. 2003, Tokyo, pp. 123-130.
    (PDF 379 kbyte)
  5. Suzuki, Y., Yoshino, T. and Kasagi, N.,
    "Evaluation of a GA-based freedback control system with arrayed micro sensors and actuators in a turbulent channel flow,"
    Proc. 4th Symp. on Smart Control of Turbulence, Mar. 2003, Tokyo, pp. 115-122.
    (PDF 513 Kbyte)
  6. Mitsuishi, A., Hasegawa, Y. and Kasagi, N.,
    "Large eddy simulation of mass transfer across an air-water interface at high Schmidt numbers,"
    Proc. 6th ASME/JSME Thermal Engineering Joint Conference, Mar. 2003, Hawaii Island, Hawaii, CD-ROM Publication, TED-AJ03-231.
    (PDF 220Kbyte).
  7. Wu, H., and Kasagi, N.,
    "Turbulent Heat Transfer in Channel Flow with Non-orthogonal System Rotation,"
    Proc. 6th ASME/JSME Thermal Engineering Joint Conference, Mar. 2003, Hawaii Island, Hawaii, CD-ROM Publication, TED-AJ03-550.
    (PDF 281 kbytes).
  8. Fukushima, N., Fukagata, K., Kasagi, N., Noguchi, H., and Tanimoto, K.,
    "Numerical and Experimental Study on Turbulent Thermal Mixing in a T-junction Flow,"
    Proc. 6th ASME/JSME Thermal Engineering Joint Conference, Mar. 2003, Hawaii Island, Hawaii, CD-ROM Publication, TED-AJ03-582.
    (PDF 3.5 Mbyte).
  9. Nagata, M., and Kasagi, N.,
    "Spatio-temporal evolution of coherent vortices in wall turbulence with streamwise curvature,"
    Proc. 3rd Int. Symp. on Turbulence and Shear Flow Phenomena, Sendai, June 2003, pp. 139-144.
    (PDF, 229 kbytes)
  10. Fukagata, K., and Kasagi, N.,
    "Turbulent friction-drag reduction control-scheme requiring only streamwise wall shear signal,"
    Proc. 3rd Int. Symp. on Turbulence and Shear Flow Phenomena, Sendai, June 2003, pp. 157-162.
    (PDF, 163 kbytes)
  11. Yoshino, T., Suzuki, Y., and Kasagi, N.,
    "Evaluation of GA-based feedback control system for drag reduction in wall turbulence,"
    Proc. 3rd Int. Symp. on Turbulence and Shear Flow Phenomena, Sendai, June 2003, pp. 179-184.
    (PDF, 351 kbytes)
  12. Suzuki, H., Kasagi, N., and Ho, C.-M.,
    "Chaotic mixing of magnetic beads in micro cell separator,"
    Proc. 3rd Int. Symp. on Turbulence and Shear Flow Phenomena, Sendai, June 2003, pp. 817-822.
    (PDF, 1.2 Mbytes)
  13. Suzuki, Y., Saito, J., and Kasagi, N.,
    "Micro Catalytic Combustor with Pt/Al2O3 Thin Films,"
    Proc. 7th Int. Conf. Microreaction Technology, Lausanne, September 2003, LMP7.
  14. Kasagi, N., Shikazono, N., Suzuki, Y. and Oku, T.,
    "Assessment of High-Performance Micro Bare-Tube Heat Exchangers for Electronic Equipment Cooling,"
    Proc. 1st Int. Symp. on Process Intensification and Miniaturization, Univ. of Newcastle upon Tyne, UK, Aug. 2003, CD-ROM publication, 6pp.
    (PDF, 111 kbytes)
  15. Kasagi, N., Suzuki, Y., Shikazono, N. and Oku, T.,
    "Optimal Design and Assessment of High Performance Micro Bare-Tube Heat Exchangers,"
    Proc. 4th Int. Conf. on Compact Heat Exchangers and Enhancement Technologies for the Process Industries, Crete Island, Greece, Sep. 27- Oct. 3 2003, pp. 241-246.
    (PDF, 129 kbytes)
  16. Hasegawa, Y., Kasagi, N.,
    "The Role of Splatting Effect in High Schmidt Number Turbulent Mass Transfer Across an Air-Water Interface,"
    Proc. 4th Int. Symp. on Turbulence, Heat and Mass Transfer, Antalya, Oct. 2003, pp. 113-120.
    (PDF 2.8 Mbyte)
  17. Iwamoto, K., Kasagi, N. and Suzuki, Y.,
    "Hierarchical Clustering Structures in Turbulent Channel Flow at Re_tau = 1160,"
    Bull. Am. Phys. Soc., Vol. 48, No. 10, Nov. 2003, p. 217.
    (PDF 8 kbytes)
  18. Suzuki, Y., Saito, J., Horii, Y., and Kasagi, N.,
    "Development of micro catalytic combustor with Pt-Al2O3 thin films,"
    Int. Symp. Micro-Mechanical Engineering (ISMME 2003), Tsuchiura, December 1-3, 2003, pp. 171-176.
    (PDF 1.5 Mbytes)
  19. Suzuki, H., Nakano, M., Kasagi, N., and Ho, C.-M.,
    "Particle Tracking Velocimetry Measurement of Chaotic Mixing in a Micro Mixer,"
    Int. Symp. Micro-Mechanical Engineering (ISMME2003), Tsuchiura, December 1-3, 2003 pp. 397-402.
    (PDF 2.7 Mbytes)
  20. Suzuki, Y., Horii, Y., and Kasagi, N.,
    "Micro catalytic combustor with tailored Pt/Al2O3 films,"
    Power MEMS 2003, Makuhari, Dec. 2003, pp. 23-26.
    (PDF 1.2 Mbytes)

Back to header


<2002>

  1. Fukagata, K. and Kasagi, N.,
    "Active Feedback Control of Turbulent Pipe Flow, "
    Proc. 3rd Symp. Smart Control of Turbulence, Mar. 2002, Tokyo, pp. 99-105.
    (PDF 485 Kbyte).
  2. Morimoto, K., Iwamoto, K., Suzuki, Y., and Kasagi, N.,
    "Genetic Algorithm-Based Optimization of Feedback Control Scheme for Wall Turbulence, "
    Proc. 3rd Symp. Smart Control of Turbulence, Mar. 2002, Tokyo, pp. 107-113.
    (PDF 3.6 Mbyte).
  3. Yoshino, T., Tsuda, M., Suzuki, Y., and Kasagi, N.,
    "Toward development of feedback control system for wall turbulence with MEMS sensors and actuators , "
    Proc. 3rd Symp. Smart Control of Turbulence, Mar. 2002, Tokyo, pp. 115-120.
    (PDF 128 Kbyte).
  4. Kasagi, N.,
    "Recent Progress in Active Feedback Control of Wall Turbulence,"
    Invited Paper, Proc. 7th TRA Conference, Turbulence Research Association, April 2002, Seoul National University, pp. 115-135.
    (PDF 1.4 Mbyte).
  5. Kimijima, S. and Kasagi, N.,
    "Performance evaluation of gas turbine-fuel cell hybrid micro generation system, "
    ASME Paper GT-2002-30111, presented at ASME TURBO EXPO 2002, June 2002, Amsterdam.
    (PDF 320 Kbyte).
  6. Suzuki, Y., and Tai, Y.-C.,
    "Micromachined high-aspect ratio Parylene beam for soft spring applications,"
    2002 Solid State Sensor, Actuator and Microsystems Workshop, 2002, Hilton Head.
  7. Fukushima, N. and Kasagi, N., 2002
    , "Heat Transfer and Friction Characteristics in Turbulent Rhombic Duct Flows,"
    Thermal Science and Engineering Special issue for extended abstracts of papers presented at 39th National Heat Transfer Symposium of Japan, vol. 10, No. 4, pp. 7-8.
    (PDF 240 kbyte).
  8. Fukushima, N. and Kasagi, N.,
    "Turbulent Momentum and Heat Transfer in Ducts of Rhombic Cross Section,"
    Heat Transfer 2002, Proceedings of the Twelfth International Heat Transfer Conference, Aug. 2002, Grenoble, France, vol. 2, pp. 207-212.
    (PDF 248 kbyte, Book info.).
  9. Yen, T. H., Kasagi, N., and Suzuki, Y.,
    "Forced Convective Boiling Heat Transfer in Microtubes at Low Mass and Heat Fluxes,"
    Symposium on Compact Heat Exchangers, A Festschrift on the 60th Birthday of Ramesh K. Shah, Aug. 2002, Grenoble, France, vol. 2, pp. 401-406.
    (PDF 80 Kbyte).
  10. Iwamoto, K., Suzuki, Y., and Kasagi, N.,
    "Nonlinear Interaction of Coherent Structures in Wall Turbulence at Low-to-moderate Reynolds Numbers,"
    IUTAM Symposium on Reynolds Number Scaling in Turbulent Flow, Princeton, Sep. 2002.
  11. Fukagata, K. and Kasagi, N.,
    "Active control for drag reduction in turbulent pipe flow,"
    Engineering Turbulence Modelling and Experiments - 5, edited by W. Rodi & N. Fueyo (Elsevier Science, 2002), pp. 607-616.
    (PDF 229kbyte, Book info.).
  12. Iwamoto, K., Kasagi, N., and Suzuki, Y.,
    "Reynolds Number Effect on Feedback Control of Wall Turbulence,"
    International Symposium on Dynamics and Statistics of Coherent Structures in Turbulence: Roles of Elementary Vortices, Oct. 2002, Tokyo, pp. 65-74.
    (PDF 1.9 Mbyte).
  13. Wu, H. and Kasagi, N.,
    "Effects of Combined Spanwise and Streamwise Rotations on Turbulent Channel Flow,"
    Proc. The Fifth JSME-KSME Fluids Engineering Conference, CDROM, OS17-5, Nov. 2002, Nagoya.
    (PDF 491 kbyte).
  14. Yoshino, T., Suzuki, Y., and Kasagi, N.,
    "Development of Genetic Algorithm Based Feedback Control System of Wall Turbulence ,"
    Proc. The Fifth JSME-KSME Fluids Engineering Conference, CDROM, OS4-1, Nov. 2002, Nagoya.
    (PDF 1.1Mbyte).

Back to header


<2001>

  1. Kasagi, N., Kawaguchi, Y., and Suzuki, K.,
    "Overview of Turbulence Control Project,"
    Proc. 2nd Symp. Smart Control of Turbulence, Mar. 2001, Tokyo, pp. 1-7.
  2. Suzuki, Y., Kasagi, N. and Yoshino, T.,
    "R&D Study on Micro Sensors and Actuators for Active Control of Wall Turbulence,"
    Proc. 2nd Symp. Smart Control of Turbulence, Mar. 2001, Tokyo, pp. 19-26
    (PDF 3.4 Mbyte).
  3. Endo, T. and Kasagi, N.,
    "Turbulence Control inLow-to-Moderate Reynolds Number Flows,"
    Proc. 2nd Symp. Smart Control of Turbulence, Mar. 2001, Tokyo, pp. 27-32.
    (PDF 1.0 Mbyte).
  4. Kurimoto, N., Suzuki, Y. and Kasagi, N.,
    "Mixing Enhancement of Coaxial Jet with Arrayed Flap Actuators for Active Control of Combustion Field, "
    Proc. 2nd Symp. Smart Control of Turbulence, Mar. 2001, Tokyo, pp. 101-106.
    (PDF 937 kbyte).
  5. Fukushima, N., and Kasagi, N.,
    "The Effect of Walls on Turbulent Flow and Temperature Fields, "
    Proc. the UEF Conference on Turbulent Heat Transfer III (CD-ROM) March 18-22, 2001, Girdwood, Alaska.
    (PDF 812kbyte).
  6. Hasegawa, Y., and Kasagi, N.,
    "The Effect of Schmidt Number on Air-Water Interface Mass Transfer,"
    Proc. the 4th Int. Conference on Multiphase Flow 2001-New Orleans (CD-ROM) May, 2001, New Orleans, Louisiana.
    (PDF 3.8 Mbytes).
  7. Uechi, H., Kimijima, S., and Kasagi, N.,
    "Cycle Analysis of Gas Turbine-Fuel Cell Hybrid Micro Generation System, "
    Proc. 2001 Int. Joint Power Generation Conference, June, 2001, New Orleans, Louisiana.
    (PDF 284 Kbyte).
  8. Iwamoto, K., Suzuki, Y., and Kasagi, N.,
    "Effect of Nonlinear Interaction on Feedback Control of Wall Turbulence,"
    Proc. 2nd Int. Symp. on Turbulence and Shear Flow Phenomena, June, 2001, Stockholm, Vol. 3, pp. 17-22.
    (PDF 226 Kbyte).
  9. Yoshino, T., Suzuki, Y., Kasagi, N., and Kamiunten, S.,
    "Assessment of the Wall Shear Stress Measurement with Arrayed Micro Hot-film Sensors in a Turbulent Channel Flow,"
    Proc. 2nd Int. Symp. on Turbulence and Shear Flow Phenomena, June, 2001, Stockholm, Vol. 2, pp. 153-158.
    (PDF 256 Kbyte).
  10. Hasegawa, Y., Kasagi, N., and Hanazaki, H.,
    "Direct Numerical Simulation of Passive Scalar Transfer Across a Turbulent Gas-Liquid Interface,"
    Proc. the First Int. Symp. on Advanced Fluid Information, Oct, 2001, Sendai, pp. 696-701.
    (PDF 1.1 Mbyte).
  11. Kurimoto, N., Suzuki, Y., and Kasagi, N.,
    "Active Control of Coaxial Jet Mixing and Combustion with Arrayed Micro Actuators, "
    5th World Conf. Exp. Heat Trans., Fluid Mech., and Thermodyn., Sep, 2001, Thessaloniki, pp. 511-516.
    (PDF 828 kbyte).
  12. Suzuki, Y., Morimoto, K., Iwamoto, K., and Kasagi, N.,
    "Feedback control of wall turbulence based on the streamwise wall shear stress, "
    Bull. Am. Phys. Soc., Vol. 46, No. 10, Nov, 2001, p. 185.
  13. El-Samni O. A., and Kasagi N.,
    "The Effects of System Rotation with Three Orthogonal Rotating Axes on Turbulent Channel Flow,"
    7th International Congress on Fluid Dynamics and Propulsion, Cairo, CD-ROM (ASME), Dec.18-20, 2001.
    (PDF 246 kbyte).

Back to header


Copyright © 2011 THTLAB, The University of Tokyo. All rights reserved.
Return to THTLAB Home Page.
Last update: 2011-4-18 by THTLAB