Articles in the last five years

Publications

Articles (in English)

2012 2011 2010 2009 2008
2007 2006 2005 2004 2003 2002 2001 2000
1999 1998 1997 1996 1995
1994 1993 1992 1991 - 1990

Articles (in Japanese), Proceedings (in English), Proceedings (in Japanese)

<2013>

Yamamoto, A., Hasegawa, Y., and Kasagi, N., “Optimal Control of Dissimilar Heat and Momentum Transfer in a Fully Developed Turbulent Channel Flow,” J. Fluid Mech., Vol. 733, 2013, pp. 189-220.

<2012>

Hasegawa, Y., Frohnapfel, B., and Kasagi, N., “Effects of Spatially Varying Slip Length on Friction Drag Reduction in Wall Turbulence,” Journal of Physics: Conference Series, Vol. 318, 2012, 022028.
Kasagi, N., Hasegawa, Y., Fukagata, K., and Iwamoto, K., “Control of Turbulent Transport: Less Friction and More Heat Transfer,” ASME J. Heat Transfer, Vol. 134, Issue 3, 2012, 031009.
Stroh, A., Frohnapfel1, B., Hasegawa, Y., Kasagi, N., and Tropea, C., “The Influence of Frequency-Limited and Noise-Contaminated Sensing on Reactive Turbulence Control Schemes,” Journal of Turbulence, Vol. 13, No. 16, 2012, pp. 1–15.
Jiao, Z., Shikazono, N. and Kasagi, N.,
"Quantitative Characterization of SOFC Nickel-YSZ Anode Microstructure Degradation Based on Focused-Ion-Beam 3D-Reconstruction Technique,"
J. Electrochem. Soc., 159 (3), pp. B285-B291 (2012).
(doi:10.1149/2.045203jes)
Han, Y., Shikazono, N. and Kasagi, N.,
"The Effect of Liquid Film Evaporation on Flow Boiling Heat Transfer in a Micro Tube ,"
Int. J. Heat and Mass Transfer, 55 (4), pp. 547-555 (2012).
(doi:10.1016/j.ijheatmasstransfer.2011.11.005)
Jiao, Z., Lee, G., Shikazono, N., and Kasagi, N., “Quantitative Study on the Correlation Between Solid Oxide Fuel Cell Ni-YSZ Composite Anode Performance and Sintering Three Dimensional Reconstruction,” J. Electrochem. Soc., 159 (7), pp. F278-F286 (2012).

<2011>

Han, Y.B., Shikazono, N., and Kasagi, N.,
"Measurement of liquid film thickness in a micro parallel channel with interferometer and laser focus displacement meter,"
Int. J. Multiphase Flow, 2010, 37 (1), pp. 36-45 (2011).
(doi:10.1016/j.ijmultiphaseflow.2010.08.010)
Jiao, Z., Takagi, N., Shikazono, N., and Kasagi, N.,
"Study on Local Morphological Changes of Nickel in Solid Oxide Fuel Cell Anode using Porous Ni pellet Electrode,"
Journal of Power Sources, 2010, 196 (3), pp. 1019-1029 (2011).
(doi:10.1016/j.jpowsour.2010.08.047)
Fan, Y., Suzuki, Y., and Kasagi, N.,
"Quenching Mechanism Study of Oscillating Flame in Micro Channels Using Phase-locked OH-PLIF",
Proc. Comb. Inst., Vol. 33, 2011.
(doi: 10.1016/j.proci.2010.05.041)
Kanno, D., Shikazono, N., Takagi, N., Matsuzaki, K. and Kasagi, N.,
"Evaluation of SOFC Anode Polarization Simulation using Three-Dimensional Microstructures Reconstructed by FIB Tomography,"
Electrochimica Acta, 2011, 56 (11), pp. 4015-4021 (2011).
(doi:10.1016/j.electacta.2011.02.010)
Matsuzaki, K., N., Shikazono, N. and Kasagi, N.,
"Three-Dimensional Numerical Analysis of Mixed Ionic and Electronic Conducting Cathode Reconstructed by Focused Ion Beam Scanning Electron Microscope ,"
Journal of Power Sources, 2011, 196 (6), pp. 3073-3082 (2011).
(doi:10.1016/j.jpowsour.2010.11.142)
Saiki, Y., Suzuki, Y., and Kasagi, N.,
“Active Control of Swirling Coaxial Jet Mixing with Manipulation of Large-scale Vortical Structures”,
J. Flow, Turbulence and Combustion, 2011, Vol. 85, Nos. 3-4, pp. 399-418.
(doi:10.1007/s10494-010-9274-3)
Saiki, Y., Kurimoto, N., Suzuki, Y., and Kasagi, N.,
"Active Control of Jet Premixed Flame in a Model Combustor with Manipulation of Large-scale Vortex Structure and Mixing",
Comb. Flame, Vol. 158, 2011.
(doi:10.1016/j.combustflame.2010.09.025)
C.-H. Seo, K. Furukawa, Y. Suzuki, N. Kasagi, T. Ichiki, and T. Ushida,
“A Topographically Optimized Substrate with Well-Ordered Lattice Micropatterns for Enhancing the Osteogenic Differentiation of Murine Mesenchymal Stem Cells,”
Macromol. Biosci., Vol. 11, Issue 7, pp. 938-945 (2011).
(doi: 10.1002/mabi.201000477)
Hasegawa, Y. and Kasagi, N.,
"Dissimilar Control of Momentum and Heat Transfer in a Fully Developed Channel Flow,"
J. Fluid Mech., 2011, 683, pp. 57-93 (2011).
( PDF 1.6Mbytes, doi:10.1017/j\ fm.2011.248)
Jiao, Z., Shikazono, N. and Kasagi, N.,
"Study on Degradation of Solid Oxide Fuel Cell Anode by using pure Nickel Electrode,"
Journal of Power Sources, 196 (20), pp. 8366-8376 (2011).
(doi:10.1016/j.jpowsour.2011.06.069)
Jiao, Z., Shikazono, N. and Kasagi, N.,
"An Ultra-fast Fabrication Technique for Anode Support Solid Oxide Fuel Cells by Microwave,"
Journal of Power Sources, 196 (13), pp. 5490-5493 (2011).
(doi:10.1016/j.jpowsour.2011.02.040)

Back to header

<2010>

Jiao, Z., Shikazono, N., and Kasagi, N.,
"Comparison of Ultra-fast Microwave Sintering and Conventional Thermal Sintering in Manufacturing of Anode Support Solid Oxide Fuel Cell,"
Journal of Power Sources, 195 (24), pp. 8019-8027 (2010).
(PDF 1.62 Mbytes, doi:10.1016/j.jpowsour.2010.06.072)
Schilder, B., Y. C. M, Simon., Kasagi, N., Hardt, S., and Stephan, P.,
"Flow Visualization and Local Measurement of Forced Convection Heat Transfer in a Microtube,"
Trans. ASME: J. Heat Transfer, Vol.132, Issue 3, 2010, No. 031702.
( doi: 10.1115/1.4000046)
He, Q., Hasegawa, Y., and Kasagi, N.,
"Heat Transfer Modelling of Gas-Liquid Slug Flow without Phase Change in a Micro Tube,"
Int. J. Heat Fluid Flow, Vol. 31, Issue 1, 2010, pp. 126-136.
(PDF 404 Kbytes, doi:10.1016/j.ijheatfluidflow.2009.11.004)
Morimoto, K., Suzuki, Y., and Kasagi, N.,
"Optimal Shape Design of Compact Heat Exchangers Based on Adjoint Analysis of Momentum and Heat Transfer,"
J. Therm. Sci. Tech., Vol. 5, No. 1, 2010, pp.24-35 .
( doi:10.1299/jtst.5.24)
Frohnapfel, B., Hasegawa, Y., and Kasagi, N.,
"Friction drag reduction through damping of the near-wall spanwise velocity fluctuation"
Int. J. Heat Fluid Flow, Vol. 31, No. 2, 2010, pp. 434-441.
(PDF 1.7 Mbytes)
Shikazono, N., Kanno, D., Matsuzaki, K., Teshima, H., Sumino, S. and Kasagi, N.,
"Numerical Assessment of SOFC Anode Polarization Based on Three-Dimensional Model Microstructure Reconstructed from FIB-SEM Image",
J. Electrochem. Soc., 157 (5), pp. B665-B672 (2010).
(PDF 1.2 Mbytes, doi:10.1149/1.333056 )
Jiao, Z., Shikazono, N., and Kasagi, N.,
"Performance of an anode support solid oxide fuel cell manufactured by microwave sintering",
J. Power Sources, 195 (1), 2010, pp. 151-154.
(PDF 1.4 Mbytes, doi:10.1016/j.jpowsour.2009.07.009)
Iwai, H., Shikazono, N., Matsui, T., Teshima, H., Kishimoto, M., Kishida, R., Hayashi, D., Matsuzaki, K., Kanno, D., Saito, M., Muroyama, H., Eguchi, K., Kasagi, N. and Yoshida, H.,
"Quantification of SOFC Anode Microstructure Based on Dual Beam FIB-SEM Technique",
J. Power Sources, 195 (4), 2010, pp. 955-961.
(PDF 798 kbytes)
Fukagata, K., Kobayashi, M. and Kasagi, N.,
"On the Friction Drag Reduction Effect by a Control of Large-Scale Turbulent Structures",
Journal of Fluid Science and Technology, 2010, Vol. 5, No. 3, pp.574-584 .
(PDF 2.0M bytes)
Morimoto, K., Suzuki, Y., and Kasagi, N.,
"Optimal Shape Design of Compact Heat Exchangers Based on Adjoint Analysis of Momentum and Heat Transfer",
J. Therm. Sci. Tech., Vol. 5, No. 1, pp.24-35 (2010).
(doi:10.1299/jtst.5.24)
Wu, T.-Z., Suzuki, Y., and Kasagi, N.,
" Low-voltage Droplet Manipulation Using Liquid Dielectrophoresis on Electret",
J. Micromech. Microeng., Vol. 20, Issue. 8, No. 085043, 8pp (2010).
(doi:10.1088/0960-1317/20/8/085043)
Kirikae, D., Suzuki, Y., and Kasagi, N.,
“Silicon Microcavity Selective Emitter with Smooth Surface for Thermophotovoltaic”,
J. Micromech. Microeng., Vol. 20, Issue. 10, No. 104006, 7pp, (2010).
(doi:10.1088/0960-1317/20/10/104006)

Back to header

<2009>

Kasagi, N., Suzuki, Y., and Fukagata, K.,
"Microelectromechanical Systems-Based Feedback Control of Turbulence for Skin Friction Reduction,"
Annu. Rev. Fluid Mech., Vol. 41, 2009, pp. 231-251.
( doi: 10.1146/annurev.fluid.010908.165221)
Kamijo, T., Suzuki, Y., Kasagi, N., and Okamasa, T.,
"High-temperature Micro Catalytic Combustor with Pd/Nano-porous Alumina,"
Proc. Comb. Inst., Vol. 32, Issue 2, 2009, pp. 3019-3026.
( doi: 10.1016/j.proci.2008.06.118)
Fan, Y., Suzuki, Y., and Kasagi, N.,
"Experimental Study of Micro-scale Premixed Flame in Quartz Channels,"
Proc. Comb. Inst., Vol. 32, Issue 2, 209, pp. 3083-3090.
( doi: 10.1016/j.proci.2008.06.219)
Hasegawa, Y, and Kasagi, N.,
"Hybrid DNS/LES of High Schmidt Number Mass Transfer across Turbulent Air-Water Interface,"
Int. J. Heat & Mass Transfer, Vol. 52, Issues 3-4, 2009, pp. 1012-1022.
(PDF 4.6 Mbytes, doi:10.1016/j.ijheatmasstransfer.2008.07.015)
Fukagata, K., Sugiyama, K., and Kasagi, N.,
"On the lower bound of net driving power in controlled duct flows,"
Physica D, Vol. 238, 2009, pp. 1082-1086.
(PDF 62 kbytes, doi:10.1016/j.physd.2009.03.008)
Hasegawa, Y. and Kasagi, N.,
"Low-Pass Filtering Effects of Viscous Sublayer on High Schmidt Number Mass Transfer Close to a Solid Wall,"
Int. J. Heat Fluid Flow, Vol. 30, 2009, pp. 525-533.
(PDF 1.6 Mbytes, doi:10.1016/j.ijheatfluidflow.2009.02.011)
Shikazono, N., Sakamoto, Y., Yamaguchi, Y. and Kasagi, N.,
"Microstructure and Polarization Characteristics of Anode Supported Tubular SOFC with Co-precipitated and Mechanically Mixed Ni-YSZ Anodes,"
J. Power Sources, Vol. 193, 2009, pp. 530-540.
(PDF 1.0 Mbytes, doi:10.1016/j.jpowsour.2009.04.031)
Xiang, R., Wu, T., Einarsson, E., Suzuki, Y., Murakami, Y., Shiomi, J., and Maruyama, S.,
"High-Precision Selective Deposition of Catalyst for Facile Localized Growth of Single-Walled Carbon Nanotubes,"
J. Am. Chem. Soc. 131, 2009, pp.10344-10345.
( doi:10.1021/ja902904v)
Nishimura, T., Miwa, J., Suzuki, Y., and Kasagi, N.,
"Label-free Continuous Cell Sorter with Specifically Adhesive Oblique Micro-grooves,"
J. Micromech. Microeng., Vol. 19, No. 12, 125002, 2009, 10pp.
(PDF 1.73 Mbytes, doi: 10.1088/0960-1317/19/12/125002 )

Back to header

<2008>

Suzuki, M., Shikazono, N., Fukagata, K., and Kasagi, N.,
"Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell,"
J. Power Sources, Vol. 180, pp. 29-40 (2008).
(PDF 1.5 Mbytes, doi:10.1016 /j.jpowsour.2008.02.039)
Yoshino, T., Suzuki, Y., and Kasagi, N.,
"Drag reduction of turbulence air channel flow with distributed micro sensors and actuators,"
J. Fluid Science and Technology, Vol. 3, No. 1, pp. 137-148 (2008).
( doi:10.1299/jfst.3.137)
Hasegawa, Y, and Kasagi, N.,
"Systematic Analysis of High Schmidt Number Turbulent Mass Transfer across Clean, Contamintaed and Solid Interfaces,"
Int. J. Heat Fluid Flow, Vol. 29, pp. 765-773 (2008).
(PDF 1.1 Mbytes, doi:10.1016/j.ijheatfluidflow.2008.03.002)
Miwa, J., Suzuki, Y., and Kasagi, N.,
"Adhesion-Based Cell Sorter With Antibody-Coated Amino-Functionalized-Parylene Surface,"
J. Microelectromech. Syst., Vol. 17, No. 3, pp. 611-622 (2008).
(doi:10.1109/JMEMS.2008.921706)
He, Q., and Kasagi, N.,
"Phase-field simulation of small capillary-number two-phase flow in a micro tube,"
Fluid Dyn. Res., Vol. 40, No. 7-8, pp. 497-509 (2008).
(PDF 607 kbytes, doi:10.1016/j.fluiddyn.2008.01.002)
Suzue, Y., Shikazono, N., and Kasagi, N.,
"Micro Modeling of Solid Oxide Fuel Cell Anode based on Stochastic Reconstruction,"
J. Power Sources, Vol. 184, pp. 52-59 (2008).
(PDF 1.6 Mbytes, doi:10.1016/j.jpowsour.2008.06.029)
Morimoto, K., Suzuki, Y., and Kasagi, N.,
"High Performance Recuperator With Oblique Wavy Walls,"
Trans. ASME: J. Heat Transfer, Vol. 130, Issue 10, 101801, 10pp. (2008).
( doi:10.1115/1.2884187)
Sakane, Y., Suzuki, Y., and Kasagi, N.,
"Development of High-performance Perfluorinated Polymer Electret and Its Application to Micro Power Generation,"
J. Micromech. Microeng., Vol. 18, No. 10, 104011, 6pp. (2008). Selected as a Highlight of 2008
(PDF 276 kbytes, doi: 10.1088/0960-1317/18/10/104011)
Fukagata, K., Kern, S., Chatelain, P., Koumoutsakos, P., and Kasagi, N.,
"Evolutionary optimization of an anisotropic compliant surface for turbulent friction drag reduction,"
J. Turbulence, Vol. 9, No. 35, pp. 1-17 (2008).
(PDF 877 kbytes, doi:10.1080/14685240802441126)
Chaktranond, C., Fukagata, K., and Kasagi, N.,
"Performance assessment and improvement of a split-and-recombine micromixer for immunomagnetic cell sorting,"
J. Fluid Sci. Technol., Vol. 3, pp. 1008-1019 (2008).
(PDF 1.2 Mbytes, doi:10.1299/jfst.3.1008)

Back to header

<2007>

Mitsuishi, A., Fukagata, K. and Kasagi, N.,
"Near-field development of large-scale vortical structures in a controlled confined coaxial jet,"
J. Turbulence, Vol. 8, No. 23, pp. 1-27 (2007).
(PDF 2.0 Mbytes, doi:10.1080/14685240600871037)
Fukagata, K, Kasagi, N., Ua-arayaporn, P., and Himeno, T.,
"Numerical simulation of gas-liquid two-phase flow and convective heat transfer in a micro tube,"
Int. J. Heat Fluid Flow, Vol. 28, pp. 72-82 (2007).
(PDF 383 kbytes, doi:10.1016/j.ijheatfluidflow.2006.04.010)
Pimpin, A., Suzuki, Y., and Kasagi, N.,
"Micro Electrostrictive Actuator with Large Out-of-Plane Deformation for Flow Control Applications,"
J. Microelectromech. Syst., Vol. 16, No. 3, pp. 753-764 (2007).
( doi:10.1109/JMEMS.2007.895222)
Hasegawa, Y, and Kasagi, N.,
"Effects of Interfacial Velocity Boundary Condition on Turbulent Mass Transfer at High Schmidt Numbers,"
Int. J. Heat Fluid Flow, Vol. 28, pp. 1192-1203 (2007).
(PDF 1.3 Mbytes, doi:10.1016/j.ijheatfluidflow.2007.04.016)

Back to header

<2006>

Kasagi, N., and Fukagata, K.,
"The FIK identity and its implication for turbulent skin friction control,"
Transition and Turbulence Control, edited by M. Gad-el-Hak and H. M. Tsai (World Scientific, Singapore, 2006), Chapter 10, pp. 297-324.
(Book info.)
Fukagata, K., Kasagi, N., and Koumoutsakos, P.,
"A theoretical prediction of friction drag reduction in turbulent flow by superhydrophobic surfaces,"
Phys. Fluids, Vol. 18, No. 051703 (2006).
(PDF 113 kbytes, doi:10.1063/1.2205307)
Angele, K. P., Suzuki, Y., Miwa, J., and Kasagi, N.,
"Development of High-Speed Micro Scanning PIV Using a Rotating Disk,"
Meas. Sci. Tech, Vol. 17, No. 7, (2006), pp. 1639-1646.
(PDF 920 kbytes, doi:10.1088/0957-0233/17/7/001 )
Yen, T.-H., Shoji, M., Takemura, F., Suzuki, Y., and Kasagi, N.,
"Visualization of Convective Boiling Heat Transfer in Single Microchannels with Different Shaped Cross-sections,"
Int. J. Heat Mass Transfer, Vol. 49, Issue 21-22, (2006), pp. 3884-3894.
(PDF 344 kbytes, doi:10.1016/j.ijheatmasstransfer.2005.12.024 )
Fan, Y., Suzuki, Y., and Kasagi, N.,
"Development of Large-Entrainment-Ratio Supersonic Ejector for Micro Butane Combustor,"
J. Micromech. Microeng., Vol. 16, No. 9, (2006), S211-S219.
(PDF 760 kbytes, doi:10.1088/0960-1317/16/9/S07 )
Okamasa, T., Lee, G.-G., Suzuki, Y., Kasagi, N., and Matsuda, S.,
"Micro Catalytic Combustor Using High-Precision Ceramic Tape Casting,"
J. Micromech. Microeng., Vol. 16, No. 9, (2006), S198-S205.
(PDF 1.2 Mbytes, doi:10.1088/0960-1317/16/9/S05 )
Suzuki, Y., and Tai, Y.-C.,
"Micromachined High-Aspect-Ratio Parylene Spring and Its Application to Low-frequency Accelerometers,"
J. Microelectromech. Syst., Vol. 15, No. 5, (2006), pp. 1364-1370.
(PDF 1.2 Mbytes, doi:10.1109/JMEMS.2006.879706 )
Kasagi, N.,
"Toward smart control of turbulent jet mixing and combustion,"
JSME Int. J., Ser. B., Vol. 49, pp. 941-950 (2006).
(PDF 1.8 Mbytes, doi:10.1299/jsmeb.49.941 )
Angele, K. P., Kurimoto, N., Suzuki, Y., and Kasagi, N.,
"Evolution of The Streamwise Vortices in a Coaxial Jet Controlled with Micro Flap-actuators,"
J. Turbulence, Vol. 6, No. 73, (2006), 19 pp.
(PDF 732 kbytes, doi:10.1080/14685240600983600 )

Back to header

<2005>

Iwamoto, K., Fukagata, K., Kasagi, N., and Suzuki, Y.,
"Friction drag reduction achievable by near-wall turbulence manipulation at high Reynolds numbers,"
Phys. Fluids, Vol. 17, No. 011702 (2005).
(PDF 329 kbytes, doi:10.1063/1.1827276)
Kimijima S. and Kasagi N.,
"Cycle analysis of micro gas turbine-molten carbonate fuel cell hybrid system,"
JSME Int. J. Ser. B, Vol. 48, No. 1, pp. 65-74 (2005).
(PDF (J-STAGE))
Morimoto, K., Suzuki, Y., and Kasagi, N.,
"Adjoint Analysis of Heat and Fluid Flow Toward Optimal Shape Design of Recuperators,"
Thermal Science and Engineering, Vol. 13, No. 4, pp. 3-4 (2005).
(PDF 360 kbytes)
Kurimoto, N., Suzuki, Y., and Kasagi, N.,
"Active Control of Lifted Diffusion Flames with Arrayed Micro Actuators,"
Exp. Fluids, Vol. 39, No. 6, (2005), pp. 995 - 1008.
(doi:10.1007/s00348-005-0033-5)
Tan, W.-H., Suzuki, Y., Kasagi, N., Shikazono, N., Furukawa, K., and Ushida, T.,
"Lamination Micro Mixer for Micro-immunomagnetic Cell Sorting,"
JSME Int. J., Ser. C, Vol. 48, No. 4, (2005), pp. 425-435.
(PDF 1.2 Mbytes)

Back to header

<2004>

Wu, H. and Kasagi, N.,
"Effects of arbitrary directional system rotation on turbulent channel flow,"
Phys. Fluids, Vol. 16, pp. 979-990 (2004).
(PDF 1.0 Mbytes, doi:10.1063/1.1649337)
Suzuki, H., Kasagi, N. and Suzuki, Y.,
"Active control of an axisymmetric jet with distributed electromagnetic flap actuators,"
Exp. Fluids, Vol. 36, pp. 498-509 (2004).
(PDF 2.0 Mbytes, doi:10.1007/s00348-003-0756-0)
Nagata, M. and Kasagi, N.,
"Spatio-temporal evolution of coherent vortices in wall turbulence with streamwise curvature"
J. Turbulence, Vol. 5, No. 017 (2004).
(PDF 2.0 Mbytes, doi:10.1088/1468-5248/5/1/017)
Fukagata, K. and Kasagi, N.,
"Suboptimal control for drag reduction via suppression of near-wall Reynolds shear stress,"
Int. J. Heat Fluid Flow, Vol. 25, pp. 341-350 (2004).
(PDF 849 kbytes, doi:10.1016/j.ijheatfluidflow.2004.02.015)
Suzuki, Y., Saito, J., and Kasagi, N.,
"Development of Micro Catalytic Combustor with Pt/Al2O3 Thin Films,"
JSME Int. J., Vol. 47, No. 3, Ser. B, pp. 522-527 (2004).
(PDF 201 kbytes)
Yabe, A., Hirasawa, S., Kasagi, N., Kitamura, T., Nakamichi, E., Takano, Y., Ogawa, H., Yokobori, S., and Ikegawa, M.,
"Road Map of Mirco-Engineering and Nano-Engineering from Manufacturing and Mechanical Engineering Viewpoints,"
JSME Int. J., Vol. 47, No. 3, Ser. B, pp. 534-540 (2004).
(PDF (J-STAGE))
Morimoto, K., Suzuki, Y., and Kasagi, N.,
"Mechanism of Heat Transfer Enhancement in Recuperators with Oblique Wavy Walls,"
Thermal Science and Engineering, Vol. 12, No. 4, pp. 99-100 (2004).
(PDF 870 kbytes).
Wu, H. and Kasagi, N.,
"Turbulent heat transfer in a channel flow with arbitrary directional system rotation,"
Int. J. Heat Mass Transfer, Vol. 47, pp. 4579-4591 (2004).
(PDF 840 kbytes, doi:10.1016/j.ijheatmasstransfer.2003.07.034).
Suzuki, H., Ho., C.-M., and Kasagi, N.,
"A Chaotic Mixer for Magnetic Beads-Based Micro Cell Sorter,"
J. Microelectromech. Sys., Vol. 13, No. 5, pp. 779-790 (2004).
(doi:10.1109/JMEMS.2004.835775)
Uechi, H., Kimijima, S., Kasagi, N.,
"Cycle Analysis of Gas Turbine--Fuel Cell Cycle Hybrid Micro Generation System,"
J. Eng. Gas Turbines Power Vol. 126, pp. 755-762 (2004).
(doi: 10.1115/1.1787505)

Back to header

<2003>

Fukagata, K. and Kasagi, N.,
"Drag Reduction in Turbulent Pipe Flow with Feedback Control Applied Partially to Wall,"
Int. J. Heat Fluid Flow, Vol. 24, pp. 480-490 (2003).
(PDF 335 kbytes, doi:10.1016/S0142-727X(03)00058-4)
Yen, T.-H., Kasagi, N. and Suzuki, Y.,
"Forced Convective Boiling Heat Transfer in Microtubes at Low Mass and Heat Fluxes,"
Int. J. Multiphase Flow, Vol. 29, pp. 1771-1792 (2003).
(doi:10.1016/j.ijmultiphaseflow.2003.09.004)

Back to header

<2002>

Iwamoto, K., Suzuki, Y., and Kasagi, N.,
"Reynolds Number Effect on Wall Turbulence: Toward Effective Feedback Control,"
Int. J. Heat and Fluid Flow, Vol. 23, pp. 678-689 (2002).
(PDF 748 kbytes, doi:10.1016/S0142-727X(02)00164-9)
Erratum (PDF 12 Kbyte, doi:10.1016/S0142-727X(02)00197-2 ).
Fukagata, K. and Kasagi, N.,
"Highly Energy-Conservative Finite Difference Method for the Cylindrical Coordinate System,"
J. Comput. Phys., Vol. 181, pp. 478-498 (2002).
(PDF 188 kbytes, doi:10.1006/jcph.2002.7138)
Fukagata, K., Iwamoto, K. and Kasagi, N.,
"Contribution of Reynolds Stress Distribution to the Skin Friction in Wall-Bounded Flows,"
Phys. Fluids, Vol. 14, pp. L73-L76 (2002).
(PDF 86 kbytes, doi:10.1063/1.1516779)
IIda, O., Kasagi, N. and Nagano, Y.,
"Direct Numerical Simulation of Turbulent Channel Flow Under Stable Density Stratification,"
Int. J. Heat Mass Transfer, Vol. 45, pp. 1693-1703 (2002).
( doi:10.1016/S0017-9310(01)00271-X ).

Back to header

<2001>

Endo, T., and Kasagi, N.,
"Active Control of Wall Turbulence with Wall Deformation,"
JSME Int. J. Ser. B, Vol. 44, No.2, pp. 195-203 (2001).
(PDF (J-STAGE))

Back to header

<2000>

Endo, T., Kasagi, N., and Suzuki, Y.,
"Feedback Control of Wall Turbulence with Wall Deformation,"
Int. J. Heat and Fluid Flow, Vol. 21, pp. 568-575 (2000)
(PDF 836kbyte, doi:10.1016/S0142-727X(00)00046-1)
Suzuki, Y., Ikenoya, M., and Kasagi, N.,
"Simultaneous Measurement of Fluid and Dispersed Phases in a Particle-laden Turbulent Channel Flow with the Aid of 3-D Particle Tracking Velocimetry,"
Exp. Fluids, Vol. 29, S185-S193 (2000).

Back to header

<1999>

Suzuki, Y., and Kasagi, N.,
"Turbulent Air Flow Measurement with the Aid of 3-D Particle Tracking Velocimetry in a Curved Square Bend,"
J. Flow, Turbulence and Combustion, Vol. 63, pp. 415-442 (1999).
(PDF)
Suzuki, Y., and Nagano, Y.,
"Modification of Turbulent Helical/Non-Helical Flows with Small-Scale Energy Input, "
Phys. Fluids, Vol. 11, No. 11, pp. 3499-3511 (1999).
(PDF )
Benhalilou, M., and Kasagi, N.,
"Numerical Prediction of Heat and Momentum Transfer over Micro-Grooved Surface with a Nonlinear k-e Model,"
Int. J. Heat & Mass Transfer, Vol. 42, No. 14, pp. 2525-2541 (1999).
(doi:10.1016/S0017-9310(98)00348-2)
Yano, T., and Kasagi, N.,
"Direct Numerical Simulation of Turbulent Heat Transport at High Prandtl Numbers,"
JSME Int. J., Ser. B, Vol. 42, No. 2, pp. 284-292 (1999).

Back to header

<1998>

Kasagi, N.,
"Progress in Direct Numerical Simulation of Turbulent Transport and Its Control,"
Int. J. Heat & Fluid Flow, Vol. 19, pp. 128-134 (1998).
(doi:10.1016/S0142-727X(97)10017-0)
Mito, Y., and Kasagi, N.,
"DNS Study of Turbulence Modification with Streamwise-Uniform Sinusoidal Wall-Oscillation,"
Int. J. Heat & Fluid Flow, Vol. 19, pp. 470-481 (1998).
(doi:10.1016/S0142-727X(98)10025-5)

Back to header

<1997>

Iida, O., and Kasagi, N.,
"Direct Numerical Simulation of Unstably Stratified Turbulent Channel Flow,"
ASME J. Heat Transfer, Vol. 119, pp. 53-61 (1997).
Kasagi, N., and Nishimura, M.,
"Direct Numerical Simulation of Combined Forced and Natural Turbulent Convection in a Vertical Plane Channel,"
Int. J. Heat & Fluid Flow, Vol. 18, No. 1, pp. 88-99 (1997).
(doi:10.1016/S0142-727X(96)00148-8)

Back to header

<1996>

Satake, S., and Kasagi, N.,
"Turbulence Control with Wall-AdjacentThin Layer Damping Spanwise Velocity Fluctuations,"
Int. J. Heat & Fluid Flow, Vol. 17, No. 3, pp. 343-352 (1996).
(doi:10.1016/0142-727X(96)00034-3)
Shikazono, N., and Kasagi, N.,
"Second-Moment Closure for Turbulent Scalar Transport at Various Prandtl Numbers,"
Int. J. Heat & Mass Transfer, Vol. 39, No. 14, 2977-2987 (1996).
(doi:10.1016/0017-9310(95)00339-8)

Back to header

<1995>

Kasagi, N., Sumitani, Y., Suzuki, Y., and Iida, O.,
"Kinematics of the Quasi-Coherent Vortical Structure in Near-WallTurbulence,"
Int. J. Heat & Fluid Flow, Vol. 16, No.1, pp. 2-10 (1995).
(doi:10.1016/0142-727X(94)00006-X)
Kasagi, N., and Matsunaga, A.,
"Three-Dimensional Particle-TrackingVelocimetry Measurement of Turbulence Statistics and Energy Budgetin a Backward-Facing Step Flow,"
Int. J. Heat & Fluid Flow, Vol. 16, No. 6, pp. 477-485 (1995).
(doi:10.1016/0142-727X(95)00041-N)
Sumitani, Y., and Kasagi, N.,
"Direct Numerical Simulationof Turbulent Transport With Uniform Wall Injection and Suction,"
AIAA J., Vol. 33, No. 7, pp. 1220-1228 (1995).
Kasagi, N. and Shikazono, N.,
"Contribution of Direct Numerical Simulation to Understanding and Modeling Turbulent Transport,"
Proc. R. Soc. Lond. A, Vol. 451, No. 1941, pp. 257-292 (1995).

Back to header

<1994>

Suzuki, Y., and Kasagi, N.,
"Turbulent Drag Reduction Mechanism Above a Riblet Surface,"
AIAA Journal, Vol. 32, No. 9, pp. 1781-1790 (1994).
Miyake, G., Hirata, M., and Kasagi, N.,
"Two-DimensionalJet Impinging on a Wall with Roughness Elements,"
Exp. Heat Transfer, Vol. 7, No. 1, pp. 1-17 (1994).
Miyake, G., Hirata, M., and Kasagi, N.,
"Heat Transfer Characteristics of an Axisymmetric Jet Impinging on a Wall with Concentric Roughness Elements,"
Exp. Heat Transfer, Vol.7, No. 2, pp. 121-141 (1994).

Back to header

<1993>

Kasagi, N., Matsunaga, A., and Kawara, S.,
"Turbulence Measurement in a Separated and Reattaching Flow Over a Backward-FacingStep with the Aid of Three-Dimensional Particle Tracking Velocimetry,"
J. Wind Eng. & Indust. Aerodyn., Vol. 46 & 47, pp. 821-829 (1993).

Back to header

<1992>

Suzuki, Y., and Kasagi, N.,
"Evaluation of Hot-Wire Measurementsin Wall Shear Turbulence Using a Direct Numerical Simulation Data Base,"
Experimental Thermal and Fluid Science, Vol. 5, No. 1, pp. 69-77 (1992).
(doi:10.1016/0894-1777(92)90057-C)
Kasagi, N., Tomita, Y., and Kuroda, A.,
"Direct Numerical Simulation of Passive Scalar Field in a Two Dimensional Turbulent Channel Flow,"
ASME J. Heat Transfer, Vol. 114, No. 3, pp. 598-606 (1992).

Back to header

<1991>

Kasagi, N., and Nishino, K.,
"Probing Turbulence withThree-Dimensional Particle Tracking Velocimetry,"
Experimental Thermal and Fluid Science, Vol. 4, No. 5, pp. 601-613 (1991).
(doi:10.1016/0894-1777(91)90039-T)

Back to header

< - 1990>

Myong, H. K., and Kasagi, N.,
"A New Approach to the Improvementof k-e Turbulence Model for Wall-Bounded Shear Flows,"
JSME International Journal, Ser. II, Vol. 33, No. 1, pp. 63-72 (1990).
Myong, H. K., and Kasagi, N.,
"Prediction of Anisotropyof the Near-Wall Turbulence With an Anisotropic Low-Reynolds-Numberk-e Turbulence Model,"
ASME J. Fluids Eng., Vol. 112, pp. 521-524 (1990).
Myong, H. K., Kasagi, N., and Hirata, M.,
"Numerical prediction of turbulent pipe-flow heat transfer for various Prandtl number fluids with the improved k-e turbulence model,"
JSME Int. J. Ser. II-Fluid, Vol. 32, No. 4, pp. 613-622 (1989).
Kasagi, N., Hirata, M., and Nishino, K.,
"Streamwise pseudo-vortical structures and associated vorticity in the near-wall region of a wall-bounded turbulent shear-flow,"
Exp. Fluids, Vol. 4, No. 6, pp. 309-318 (1986).
Iritani, Y., Kasagi, N., and Hirata, M.,
"Direct verlocity-measurement in low-speed water flows by double-wire hydrogen-bubble technique,"
Exp. Fluids, Vol. 1, No. 2, pp. 111-112 (1983).

Back to header